Bow shaped mouse clamp

Bow clamp

• Type and StructureBow clamps, also known as steel gates, are mainly divided into two types: iron sheet bow clamps and iron wire bow clamps. The iron bow clamp consists of two semi-circular iron rings as clamps, with shaft shaped ends, which can rotate by being inserted into the holes at both ends of the bottom iron plate. Additionally, 1 to 2 elastic steel bows with hollow ends are used to wrap around the two iron rings. The pressure bow of the wire bow clamp is made of iron wire, with steel wire as the spring, a thin rope tied to the tail, and a support rod tied to the other end of the thin rope. Some wire bow clamps will be equipped with fine wire mesh to prevent small mice from missing, and iron chains will be tied behind the clamp to prevent large mice from taking the clamp away or the clamp from falling from a high place and injuring people.

• working principleWhen clamping, press down the steel bow and open the iron ring to both sides. Use a support rod to press down on one ring, and slightly pin the end of the support rod on the sandwich pedal to maintain unstable balance. When the mouse touches the pedal, the support rod disengages, the steel bow bounces up, the iron ring closes, and the mouse is captured.

• Applicable scenariosIt is a mouse trap that does not use bait, mainly used to catch wild mice or other larger animals, or placed in places where it is difficult to use pedal traps.

• UsagePlace the cloth at the entrance of the mouse hole or in a place where mice often appear. When placing it, make sure the mouse clip is level with the ground. After supporting it, sprinkle some soil around the clip and on the surface of the board.

Specification: 100mm, with handle

Brand: Baoyuan Xingye

Model: BY-SJ02

Manufacturer: Beijing Baoyuan Xingye Technology Co., Ltd