Boiler wall thermocouple WRNT-11A WRNT-11B WRET-11A WRET-11B

1、 Product IntroductionProduct introduction

WRN□TThe series of boiler wall thermocouples are mainly used for measuring the temperature of boiler tube walls, furnace walls, and other cylindrical surfaces. adoptΦ3~6mmThe armored component is used as a temperature probe, and the lead is made into a cable shape. The measuring end is welded or fixed to the stainless steel heat collecting block with screws(Thermal resistance is not suitable for welding method)form. Surface temperature can be measured by welding or clamping curved temperature sensors that match the furnace wall onto the pipe wall, furnace wall, pipeline, or cylinder. Technical conditions meetJB/T5582-91regulations.

WRN□T seriesboiler wall thermocouple is mainly used to measure the surface temperature ofboiler tube wall, furnace wall and other cylinders. use Φ The 3~6mm armoredelement is used as the temperature measuring probe, the lead is made into cableshape, and the measuring end is welded or fixed on the stainless steelcollector block with screws (welding method is not applicable to thermalresistance). The surface temperature can be measured by welding or hooping thecurved surface temperature sensing piece which is matched with the furnace wallon the pipe wall, furnace wall, pipe and cylinder. The technical conditionscomply with JB/T5582-91.

2、 Technical parametersTechnical parameter

3、 External dimensions External dimensions

4、 Product classificationProduct classification

The above parameters are for reference only and are subject to change without prior notice!

Above parameters arefor reference only and are subject to change without prior notice!