Blue M high-temperature sintering oven

The welded and sealed internal chamber eliminates the migration of smoke to the insulation material

Prevent product oxidation

When the airflow leaks, issue an alarm to the operator and turn off the oven heater to minimize adverse consequences

When the door is opened, the door switch will turn off the heater and blower to ensure the safety of the operator

Suitable for inert gases such as argon, carbon dioxide, helium, and nitrogen

Outdoor heavy-duty nickel chromium wire heating element

*The inner/outer shell chamber allows the air surrounding the coolant to circulate around the inert gas chamber

Ingestion of blower motor

There are gas flow and chamber pressure monitors and regulators on the control panel

Large capacity horizontal airflow system

6-inch mineral wool insulation material

Blue M fiberglass door sealing ring design

3/8-inch inlet connection

Exhaust port and damper

pressure relief valve

Blow timer

Heating enable lamp

Models IGF 8880 and 9980 are water-cooled

NFPA 86 Grade B Oven

Temperature: Room temperature+15 ℃ -593 ℃ (1099 ° F)

Uniformity: ± 2% of the set value

Control accuracy: ± 0.5 ° C

Resolution: ± 0.1 ° C

Close the exhaust device and run it without load at rated voltage