Biochemical Incubator

one.intelligentBiochemical IncubatorProduct Introduction:

SPX-150 type/SPX-250 typeintelligentBiochemical IncubatorSuitable for biology, genetic engineering, and medicineLaboratories of research institutions, colleges, production units or departments in the fields of education, health and epidemic prevention, environmental protection, agriculture, forestry and animal husbandry. It is a constant temperature equipment for the cultivation and preservation of bacteria, fungi, microorganisms, and tissue cells, as well as water quality analysis and BOD testing, breeding experiments, and plant cultivation.

IIMain technical parameters:

◇ Model: SPX-150/SPX-250

◇ Studio capacity: 150 liters, 250 liters

◇ Temperature range: 5-60 ℃

◇ Temperature uniformity: ≤± 0.5 ℃

◇ Temperature fluctuation: ≤± 0.5 ℃

◇ Plastic sprayed steel plate shell, stainless steel liner, polyurethane foam insulation

◇ Vacuum glass observation window, lighting fixture

◇ Microcomputer control, LCDdisplay

Equipped with stainless steel circulation air duct, air convection circulation, uniform temperature

3、 Instructions for use:

1. Connect the power supply, turn on the power switch, and the whole machine will be powered on. The power indicator light inside the switch will light up.

2. Please refer to the LCD temperature control instrument manual for temperature control settings.

3. If lighting is required, turn on the lighting switch.

4. This incubator has breakpoint protection function and a delay function of about 90 seconds. It takes about 90 seconds to restart the compressor after it stops.

4、 Maintenance and cultivation:

1. The outer shell of the incubator should be reliably grounded.

2. The incubator should be placed in a cool, dry, well ventilated place away from heat sources and direct sunlight. Place it steadily to prevent vibration and noise.

3. To ensure effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm. There should be a 50mm gap on the side of the box, and a 300mm space at the top of the box.

4. When handling, repairing, and maintaining the incubator, collision, shaking, and vibration should be avoided; The inclination is less than 45 degrees.

5. The instrument suddenly doesn't work. Please check if the fuse tube (behind the box) is burnt out and check the power supply.

6. When cooling this incubator, it is not advisable to make the temperature difference between the incubator and the ambient temperature greater than 25 degrees.