Bidirectional comprehensive inclined swing table

NegotiableUpdate on 06/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Description: WS-YB-1010 bidirectional comprehensive tilting and swinging table is mainly used to simulate the tilting and swinging environment of various mechanical, electrical and electronic products installed on ships, aircraft, moving artillery and other equipment, in order to determine the ability of the test piece to withstand the specified severity level of tilting and swinging and the integrity of the structure.

Product Details

　1、 Equipment Overview

WS-YB-1010 bidirectional comprehensive tilting and swinging table is mainly used to simulate the tilting and swinging environment of various mechanical, electrical and electronic products installed on ships, aircraft, moving artillery and other equipment, in order to determine the ability of the test piece to withstand the specified severity level of tilting and swinging and the integrity of the structure.

Tilt and sway tests are mainly applicable to water or aviation equipment, used to simulate the tilt or sway environment caused by manipulation, loading imbalance, and natural environment (such as wind and waves), and to assess the structural integrity and performance reliability of various related components of the equipment.

The WS-YB-1010 bidirectional comprehensive tilt swing table meets the requirements of relevant test standards such as GB/T2423.101 "Environmental Testing for Electrical and Electronic Products Part 2 Test Methods: Tilt and Swing", GJB150.23-91 "Environmental Testing Methods for Military Equipment: Tilt and Swing Test", GJB150.23A-2009 "Environmental Testing Methods for Military Equipment: Tilt and Swing Test".

The WS-YB-1010 bidirectional comprehensive tilt swing table is mainly composed of two parts: the mechanical table body and the control measuring instrument.

II Technical Parameter

project	Indicators		unit
Large load	500 (including fixtures)		kg
table size	1000×1000		mm
The center of gravity of the larger specimen is high	500		mm
Install thread	M16@200 × 200 (customizable)
direction	Horizontal (tilt, shake)	Vertical (tilt, shake)
angle	0~60	0~30	°
cycle	3~20	3~20	s
Integrated Swing	Roll ± 45 ° (cycle 20s), pitch ± 22.5 ° (cycle 14s)
Test duration	Not less than 30 minutes
External dimensions	Platform size 3000 × 2500 × 1500 Control cabinet 600 × 600 × 1100
Power requirements	380V±10%，50Hz，75kW 220V±10%，50Hz，10A

3、 Component Introduction

The WS-YB-1010 bidirectional comprehensive tilting swing table consists of two shaft systems, with a lateral shaft system on the inside and a longitudinal shaft system on the outside. It uses a motor as the actuator and drives the two shaft systems to rotate through a reducer. The driver comprehensively demodulates the input signal from the signal source and the feedback signal from the angle sensor installed at the rotating shaft. The motor drives two rotating shafts based on the input signal, causing the swinging shaft system and the fixtures and specimens loaded on the installation platform to oscillate back and forth around two horizontal shaft systems, achieving accurate control of angle and period.

3.1 Platform body

The platform is mainly composed of a tabletop, a horizontal axis, a vertical axis, a motor, a reducer, a frame, and other parts.

3.2 Control measuring instrument

The control measuring instrument is divided into angle measurement system module, digital control system module, motor drive control module, and external communication interface system module according to functional modules.

4、 Usage environment

4.1 Working environment

Power requirements: three-phase 380V, 50Hz, 75kW;

Recommended spatial layout (L × W × H): 4000mm × 3500mm × 4000mm

Minimum positioning channel (W × H): 2500mm × 2500mm

Temperature (℃): 0-40

Humidity: ≤ 95%

Foundation requirements: Produce a dedicated foundation according to the foundation diagram