- Phone
-
Address
903, Hanhaida Building, No.7 Songgang Avenue, Tantou Community, Songgang Street, Bao'an District, Shenzhen
Product Categories
Shenzhen Zhongda Energy Conservation and Environmental Protection Technology Co., Ltd
Beauty and medical wastewater treatment equipment
NegotiableUpdate on 05/20
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Introduction to beauty medical wastewater treatment equipment: Medical wastewater contains many inorganic and organic substances, such as various drugs, disinfectants, and difficult to degrade substances. Therefore, in the treatment of sewage, both hygiene indicators such as disinfection and sterilization should be considered, as well as environmental indicators such as CODcr and BOD5. This product is a combination type automatic wastewater treatment equipment designed and developed specifically for small and medium-sized medical institutions. It integrates advanced pH controllers, reaction tanks, and dosing components to form a complete wastewater treatment system.
Product Details
1Beauty and medical wastewater treatment equipmentInlet and outlet water quality:
1Wastewater quality
project |
CODcr (mg/l) |
BOD5 (mg/l) |
SS(mg/l) |
PH |
Number of coliform bacteria (MPN/L) |
numerical value |
300 |
150 |
150 |
6-9 |
106～108 |
2Emission standards
The concentration of discharged pollutants shall comply with the "Water Pollutant Discharge Standards for Medical Institutions"（GB18466-2005）yiPreprocessing standards.
project |
CODcr (mg/l) |
BOD5 (mg/l) |
SS(mg/l) |
PH |
Number of coliform bacteria (MPN/L) |
numerical value |
250 |
100 |
60 |
6-9 |
5000 |
two、Beauty and medical wastewater treatment equipmentworkmanship
1Process selection
According to local environmental requirements and the quality of the incoming water for this project, combined with our company's experience in treating similar medical wastewater, the treatment process for this project is as follows:
2Process Description
The raw water is collected by the raw water tank and lifted by the wastewater lifting pump toPHAdjust the tank, add overflow to the sedimentation tank, and then add it to the sedimentation tankPACThePAMWait for the medication to precipitate large particles; Then overflow to the advanced oxidation tank, and the advanced oxidation section adopts advanced advanced advanced technologyCODOxidation dosing device,determineCODThe effluent meets the standard; After advanced oxidation,The conical structure reaction tank is used for natural sedimentation of wastewater, resulting in less sludge reduction,2-4Clean once a month; Further sample disinfection of the overflow wastewater,This sterilization and disinfection section,Using ozone sterilizer,Fully sterilize and disinfect the drainage system.Go online againPHcallback,After the previous treatment, the wastewater has basically reached the standard. To ensure the effectiveness of wastewater treatment, this design sets up multi-media activated carbon as a safeguard measure for discharge. Multi media filtration can remove various residual suspended solids, partial color, organic matter, colloids, bacteria, etc. from wastewater;
Due to the small amount of wastewater treatment in the project, in order to facilitate operation and management, reduce investment, and save land, this design will design the reaction part of the process as intermittent treatment.
Similar Product Recommend
