- Phone
-
Address
Beijing
Product Categories
Beijing Shengshi Eurasia Holdings Co., Ltd
Baslac/PepsiCo 45-W07 environmentally friendly water-based additive
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Baslac/PepsiCo 45-W07 environmentally friendly water-based additive $r $nBaslac 80-10 is a polymer material modifier in the PepsiCo series, which improves the mobility of polymer segments through physical plasticization. This product is a light yellow transparent liquid that is compatible with most synthetic resins and is suitable for processing scenarios where material flexibility needs to be adjusted.
Product Details
Baslac/PepsiCo 45-W07 environmentally friendly water-based additive
Baslac 45-W07 is an aqueous system additive based on non-ionic polymers, with a solid content of 50 ± 2%. Through special molecular structure design, this product can effectively balance leveling and defoaming requirements, and is suitable for various water-based industrial coating systems. Its low odor characteristics comply with the GSB 16-3062 environmental standard.
Baslac/PepsiCo 45-W07 environmentally friendly water-based additive
Product Features
Baslac 45-W07 is an aqueous system additive based on non-ionic polymers, with a solid content of 50 ± 2%. Through special molecular structure design, this product can effectively balance leveling and defoaming requirements, and is suitable for various water-based industrial coating systems. Its low odor characteristics comply with the GSB 16-3062 environmental standard.
technical parameters
physical properties
Viscosity (25 ℃): 800-1200 mPa · s
PH value: 7.0 ± 1.0
Density (20 ℃): 1.05 ± 0.02 g/cm ³
Functional performance
Reduce surface tension to 32-35 mN/m
Shorten finger touch drying time by about 20%
Good compatibility with common water-based resins
Eco-Certification
Certified by China Environmental Labeling
Does not contain alkylphenol polyoxyethylene ether substances
VOC content<30g/L
Application Guide
Add method:
Suggested addition amount: 0.5% -2.0% (total formula amount)
Should be added in the later stage of the dispersion phase
Suggested mixing speed: 300-500rpm
Applicable system: adaptive resin includes: • water-based acrylic lotion • polyurethane dispersion • water-based epoxy system
Notes:
The storage temperature should be maintained at 5-40 ℃
It is recommended to stir thoroughly before use
Shelf life: Original sealed for 18 months
quality control
The product has passed the ISO 2812-1 liquid medium resistance test, and a complete COA analysis report and technical documents in accordance with GB 24410-2020 standard are provided for each batch.
