BWEX series side wall explosion-proof axial flow fan

NegotiableUpdate on 07/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1. The ventilation fan adopts advanced forward swept blades, low-noise explosion-proof motor direct drive, square shell design, which can be easily installed on concrete walls, brick walls or light steel profiled wall panels; 2. Equipped with a 45 ° square rain cover to prevent rainwater from entering, and built-in insect proof mesh to prevent insect invasion; 3. The material of the air duct can be made of carbon steel, stainless steel, etc. according to customer requirements; 4. Gravity check valves, insect screens, etc. can be added according to customer requirements; 5. The structure is sturdy, the appearance is beautiful, the noise is low, the air volume is large, the operation is reliable, safe and efficient, and the installation is simple.

Product Details

Product Introduction

1、 Composition of models and their representative significance

The product model and its meaning are as follows:

2、 Usage environment

The ventilation fan should operate reliably under the following conditions:

00001——atmospheric pressure80kPa～110kPa；

00002——Ambient temperature-20℃～+40℃；

00003——Standard oxygen content in the air:21% (volume ratio);

00004——The relative humidity of the surrounding air is not greater than95% (at 25 ℃);

00005——existⅡA～ⅡB、ⅡA～ⅡCLevel,Explosive hazardous areas formed by the mixture of flammable gases, vapors, and air in groups T1 to T4, as well as environments where explosive gas mixtures occur or may occur;

00006——A place without severe vibration and impact.

3、 Basic technical parameters