BAW sanitary centrifugal pump

electrical machinery

1. According to the configuration, the three-phase AC motor mainly adopts the "ABB" brand, designed and manufactured in accordance with the International Electrotechnical Commission IEC60034 and IEC60072 standards, and meets the requirements of the European Community's "CE" marking.

2. Explosion proof motors can be selected to meet the needs of different occasions.

3. Superior electrical performance, low noise, and low vibration, the standard design protection level of the motor is IP55, and the insulation level is F.

4. Working voltage: ≥ 3KW. 220-240V/380-420V, △/Y>3Kw, 380-420V/660-690V, △/Y

5. Frequency: 50Hz/60Hz

6. Working mode: Continuous (SI)

7. Speed: The standard pump speed is 2900r/min

Technical Parameter

Specification: 3T-180T, 0.55KW-75KW

Material: SUS304, SUS316L (in the selection of materials, all parts in contact with the material such as the pump body, pump cover, impeller, etc. are made of SUS316L or SUS304 stainless steel)

Standards: DIN, SMS

Impeller: Open impeller, leaving no hygiene dead corners

Working conditions: Sanitary centrifugal pumps are designed for horizontal conveying of high and low liquid levels, and are not self-priming. (Self priming pump is selected for self-priming type)

Surface treatment: Polish the liquid receiving part, and treat the rest with matte or sandblasting.

Import pressure: 0.5MPa

Temperature range: -10 ℃ to 140 ℃ (EPDM)

Washable mechanical seal: water pressure: high 0.1MPa, water volume: 0.25-0.5Lmin

BAW Sanitary Centrifugal Pump Model Description