B25D-750 (1+1) Double Station Blow Molding Machine

NegotiableUpdate on 07/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The B25D-750 dual station blow molding machine is based on a precise calculation of the die head flow channel design, which is streamlined and has no dead corners. It can quickly change colors to ensure low back pressure, effectively extending the service life of the extrusion system and gearbox. The distribution of each flow channel in the multi cavity die head is reasonable, and the flow rate can be easily adjusted. The multi-layer co extrusion die head adopts a double-layer compensation diversion shuttle, and the single-layer die head of the Star Bell blow molding machine. All types of die heads can increase the visible liquid level line design

Product Details

The B25D-750 dual station blow molding machine is based on precise calculation of the die flow channel design, which is streamlined and has no dead corners, and can quickly change colors
Ensure low back pressure and effectively extend the service life of the extrusion system and gearbox
The distribution of each channel in the multi cavity mold head is reasonable, and the flow rate can be easily adjusted
Multi layer co extrusion die with heart-shaped channel
Single layer die head using double-layer compensating shunt shuttle
All types of Xingbeier blow molding machines have a visible liquid level line design that can be added to the mold heads

B25D-750 Double Station Blow Molding Machine Specification
Application	B20D-750
clamping force	200kN
Hydraulic drive power	30kW
Template spacing	240-520mm
Move mold stroke	480mm
Dry cycle time	3.4S
Die size	Maximum width: 740mm
	Maximum height: 450mm
	Minimum thickness: 2x120mm
	Maximum module weight: 2x350kG
Drive form of extruder	Communication frequency conversion motor drive
voltage	380V/50Hz
air pressure	6-10bar
Air Consumption	About 150m3/h
External dimensions of blow molding machine (length x width x height)	5000x36500x4000mm
Blow molding machine weight	Approximately 19.2 tons

The Xingbeier shaped part blow molding machine system is equipped with an internationally renowned brand hard tooth surface gearbox, which runs smoothly, with low noise and high efficiency
The extrusion screw adopts a combination of slotted feeding barrel and barrier screw design, with uniform melt and high plasticizing ability
The material is made of high-quality nitride alloy steel with high surface hardness and long service life
The B25D-750 dual station blow molding machine can be widely used for various raw materials such as PE, PP, PC, PA, PVC, PETG, EVOH, etc

Extruder	Driver power	Maximum plasticizing capacity
		HDPE	PP
E20/20	1.5KW	2kg/h	-
E25/25	3KW	5kg/h	-
E40/25	11KW	30kg/h	24kg/h
E50/25	18.5KW	50kg/h	40kg/h
E60/25	30KW	90kg/h	70kg/h
E70/25	45KW	130kg/h	90kg/h
E80/25	55KW	165kg/h	120kg/h
E90/25	75KW	220kg/h	160kg/h
*The maximum plasticizing capacity is based on 30% uniformly recycled material and 70% new material

Top cutting flash device is used to remove bottleneck, shoulder, and handle flash, with electrical control including flash cooling and blowing
The bottom cutting flying edge device adopts a clamping cutting flying edge structure, driven by a cylinder, and electrically controlled
The height of different products can be vertically adjusted

The hydraulic system is driven by a servo variable speed pump, which has higher energy efficiency and saves 40% energy compared to ordinary oil circuits
Unique design, low oil pump load, low system heat generation, and more energy-efficient overall hydraulic system
The hydraulic valve uses Bosch Rexroth brand, which is stable, reliable, responsive, and has high precision
The system runs smoothly, and the oil temperature is automatically controlled by PLC
Dual filtration of oil suction and return, longer service life of hydraulic oil and hydraulic components

Austrian B&G microcomputer system, integrated control, machine temperature, speed, and time can be directly displayed and freely adjusted through the panel
Equipped with a 10.4 "TFT true color operation screen, the display is accurate and clear, and parameter storage and adjustment are faster
The system is equipped with a 100 point billet wall thickness controller, which provides precise control and uniform product wall thickness, effectively saving raw materials
Machine malfunction, automatic diagnosis, automatic alarm, direct display on the operation screen, Ethernet remote diagnosis, correction of erroneous parameters

Professional design, all blow molded products can achieve fully automatic removal of burrs. Carefully selected imported high-quality mold steel, fast cooling, and long service life

Separate electrical cabinets for strong and weak electricity to eliminate interference
High voltage isolation transformers effectively prevent short circuits caused by human or accidental factors, protecting PLCs from damage
The blow molding machine cabinet is embedded with professional industrial air conditioning, which effectively extends the service life of electrical components in hot, humid or dusty environments, ensuring stable operation of the control system