- Phone
-
Address
2A04, Building B2, Yunsheng Science Park, No. 11 Spectral Middle Road, Huangpu District, Guangzhou City, Guangdong Province
Product Categories
Guangzhou Xijiang Instrument Equipment Co., Ltd
Automatic tank cleaning device
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The automatic tank cleaning instrument temperature control system has triple safety protection and adopts a dual temperature sensor design; Independent over temperature protector, independent leakage and overcurrent safety protection; Up to 8 6L Suma cans can be cleaned simultaneously; Complete the leak detection, humidification, heating, and vacuuming process in one step, automatically complete multiple cycles of cleaning work, controlled by a high-definition touch screen, and easy to operate.
Product Details
Automatic tank cleaning deviceThe temperature control system has triple safety protection and adopts a dual temperature sensor design; Independent over temperature protector, independent leakage and overcurrent safety protection; Up to 8 6L Suma cans can be cleaned simultaneously; Complete the leak detection, humidification, heating, and vacuuming process in one step, automatically complete multiple cycles of cleaning work, controlled by a high-definition touch screen, and easy to operate.
|
|
1 Atmospheric pre concentration host
Three stage refrigeration rapid heating systemSemiconductor electronic integrated cold trap can effectively remove CO2, O2, and other pollutants from the airH20 interference without losing the specified polar compounds in the method, capture temperature:~40 ° C. Cold trap can be built in at mostThree low-temperature and three rapid heating devices are used to achieve low-temperature water removal and remove adsorbed airCO2、O2、H2O, Capture compounds between C2-C16 in the air and transfer them into gas chromatography through valvesAnalyze in GC or gas chromatography-mass spectrometry (GC-MS), switch to reverse blowing high-temperature cleaning mode after injection, and maintain atmospheric pre concentrationReduce the system's low background. Capture trap3-channel rapid heating control range: room temperature -400 ° C with increments of 1 ° C (heating rate) 3000 ° C/min。 Built in high-definition7-inch touch screen control, user-friendly graphical interface, easy to learn and use. It can achieve single machine operation,Can be used with any brand of gas chromatography orGC-MS combination. Online recording function for testing parameters of each sample, can record the actual desorption process parameters of each sample tube,Convenient for users to understand the analysis process of samplesBetter control of experimental conditions optimization and traceability.
|
2 Su code can automatic sampler
Can be configured with one or two12 digit 1-6L Su code tank automatic sampler. Multiple injection functionThe same Su code control can achieve up to 9 repeated concentrated injections, effectively improving parallel detection capability. Equipped with channel reverse cleaning functionIt can eliminate the residual pollution from the previous time. Multi position switching valve and transmission pipeline have heating functionEliminating sample retention. |
|
|
|
3 Dynamic Dilution MeterThe built-in microprocessor independently controls the operation and can automatically complete various standard gas and sample dilutions.Dilution ratio: 1-1000 times, maximum dilution ratio of 2500 times. |
Product Features | Product Features
The temperature control system has triple safety protection and adopts a dual temperature sensor design;
Independent over temperature protector, independent leakage and overcurrent safety protection;
Up to 8 6L Suma cans can be cleaned simultaneously;
Complete the leak detection, humidification, heating, and vacuuming process in one step, automatically complete multiple cycles of cleaning work, high-definition touch screen control, easy to operate;
They are all using Taitong (some companies)
Resolve your backup advantages
Provide technical support for installation, debugging, and training
Taitong technical engineers can provide on-site technical guidance and communication. After on-site communication, installation, debugging, and on-site acceptance testing can be carried out within 2 hours. Installation, debugging and acceptance completed, on-site
Provide a solution. Training on usage and operation, after passing the acceptance inspection and being put into operation, regularly organize relevant activities
Personnel undergo training.
Ensure scientific management of delivery time and traceability of production progress
quality control
Incoming inspection and control, each finished product is tested and inspected to be qualified before leaving the factory
Layer by layer inspection, the finished product must pass 52 tests and pass the inspection before leaving the factory
Factory live shooting
Legitimate manufacturers provide greater assurance
CNC machining center
High quality supervision, product development and upgrading capabilities, and customizable activation devices with different functions
Service Process
Quickly understand Taitong thermal analysis and find solutions suitable for the industry
