Automatic pour point cloud point analyzer

NewLab 8130 Automatic pour point cloud point analyzer

Meets cloud point standards ASTM D2500, D5771, D5772, D5773; IP219、IP444、IP445、IP446; DIN51597; ISO3015；

Pour point standards ASTM D97, D5950, D5853; IP15、IP441; ISO3016；

Can measure the pour point of petroleum samples, such as biodiesel, various petroleum products, crude oil, motor and engine fuels, additives, lubricants, etc., ranging from+80℃～-80℃；

Measuring principle：

1. Cloud point:According to the standard method, the sample is cooled and a cloud point feature appears at the silver bottom of the test can, causing light reflection, which is detected by an optical sensor. Measurement can be controlled by operating software without considering the color of the sample, and dynamic measurement can be performed;

2. Pour point:According to standard methods, the sample is cooled at a certain cooling rate. Within a set temperature interval, the robotic arm lifts the test sample tube out of the cooling chamber and tilts it to a horizontal position to test the flow characteristics of the sample; The flow of the sample can be detected by a thermal probe (PT100 detector) placed on the surface of the sample. Once it comes into contact with a cold sample, it will react；

productfeature：

1. Cloud point: Optical pulse emission of coaxial fiber in the I.R spectrum; Tilt point: Two PT100 detection probes are placed on the surface of the sample; The robotic arm moves to tilt the sample tube to a horizontal position;

2. Measurement temperature sensor: Platinum PT100 Class A type; The temperature probe of the cloud point contacts the bottom of the sample testing tube;

3. Test tube: Provide dimensions and capacity according to standard method requirements; The sample has liquid level markings; The top fixture can fix the glass tube and the analysis head; Silver plated bottom with scratch resistant film protection;

4. Refrigeration system: Built in CFC compressor system,

-Can achieve temperature requirements of single-stage -40 ℃ - bipolar -80 ℃;

-The system integrates an energy-saving system and enters standby mode 15 minutes after the analysis is completed;

5. Safety measures:

-First stage compressor control system; Second stage compressor control system;

-Thermostat is used for activating the second stage compression system;

-Thermal valves can be used for each cooling/heating jacket;

-The compressor is equipped with an internal overload protection device;

NewLab 8130 automatic pour point cloud point analyzer

1. Technical parameters:

- Temperature unit:°C / °F；

- Measurement range:+80℃～-80℃；

- Temperature resolution: 0.06℃；

- Temperature accuracy: ± 0.1℃；

- Temperature repeatability/reproducibility: meets or exceeds the requirements of standard methods

2. Software Introduction:

newLabLinkSoftware can be used simultaneouslystandcontrol6An analysisunit：

- User friendly interface

- All analysis parameters are recorded and saved

- Users can set parameters and methods

- Users can set the result printing format

- Printable charts and data results

- Automatically identify the analysis type of the connection.

3. The software consists of

Analysis menu:

- Standard methods such as ASTM/IP/ISOEN/DIN, etcwait；Tilt point measurement, with built-in sample preheating function and external without sample preheating function;

- Optional methods:Quick measurement mode,T-Sample T-Bath (△ T constant), cooling rate ℃/hour，

- Sound alarm and information prompt (analysis completed, error occurred, malfunction occurred)；

Diagnostic menu:

- Directly enter the analog, digital, input, and output interfaces;

- Numerical display options: ℃ or Volt.

Calibration menu:

- Automatically calibrate each temperature probe;

- The closest calibration date of each temperature probe can be printed;

- Display calibration chart;

- Input compensation value;

- Standard and Gao level calibration modes.

Data processing:

- Can input operator name and product name;

- File saving function, easy to read at any time;

- All analysis data has been saved in a format compatible with Excel;

- Large storage capacity, capable of storing over 60000 measurement and analysis data;

- Compatible with LIMS.

Display unit:

- TFT/LCD 12Inch, resolution: 1024*768，16.2M；

- 2*USB， Can connect printers and external computers;

Power Supply:

- Power requirements: 220V ± 15%, 50/60Hz.

- Environmental requirements: maximum temperature of 32 ℃; The maximum humidity is 80%;

- CE safety mark.

Specifications: