Automatic petroleum product distillation testerYG-82101

GB/T 6536

ASTM D86, D850, D1078

ISO 3405, IP123, JIS K2254

Automatic petroleum product distillation testerSummary

The YG-82101 automatic single tube distillation tester for petroleum products is a high-tech product newly developed by our company. The instrument has the characteristics of simple operation and good repeatability. Only the operator needs to add the sample and select the testing mode to fully automate the experiment. The use of an internal compressor cooler makes the entire instrument structure reasonable and compact. The entire experimental process has achieved full automation, with a large LCD full-color touch screen operation panel that provides the system with a color display interface. The display screen can clearly show the distillation range curve and experimental data.

This tester is suitable for testing oil products of categories 1-4 as specified in ASTM D86, as well as benzene distillation tests as specified in ASTM D850 and ASTM D1078, and crude oil distillation tests as specified in ASTM D2892.

characteristic

(1) All settings and experimental operations can be performed on the full-color touch screen operation panel;

(2) Large LCD display screen and Chinese interface make setting and operation more convenient;

(3) The distillation temperature and distillation curve during the experiment can be displayed on the screen at any time;

(4) The instrument is suitable for both benzene distillation and crude oil distillation for distillation experiments;

(5)

(6) Adopting high-precision liquid level tracking device, it can accurately measure real-time distillation volume;

(7) Due to the use of temperature setting methods for initial and final heating, stable initial and final boiling points can still be obtained without being affected by heater degradation or initial heating temperature;

(8) The sample for the 10% residual oil and carbon test can be obtained with just one distillation;

(9) The automatic dry spot detection device can automatically detect dry spots; (Dry point detection sensors need to be purchased separately).

(10) This testing instrument is equipped with a standard output port (RS-232C) for inputting data into a microcomputer, which is beneficial for laboratory networked quality management;

(11) This instrument uses a temperature correction circuit processed by software, allowing users to perform temperature correction simply and correctly.

Instrument specifications:

(1) Scope of application: ASTM D86, ASTM D850, ASTM D1078, ASTM D2892 standards.

(2) Test temperature range: Room temperature/10 ℃~400 ℃

(3) Temperature unit: 0.1 ℃

(4) Temperature detection: specially designed platinum resistance sensor

(5) Distillation rate: 2-9ml/min, can be selected in units of 0.5ml

(6) Distillation speed control method: PID regulation

(7) Program control mode: microcomputer control

(8) Receiver room temperature: 0 ℃ to room temperature

(9) Temperature range of condenser tube: controlled between 0-80 ℃

(10) Initial boiling point and liquid level detection: Half moon automatic tracking photoelectric detection system

(11) Dry point detection: automatically detected by a temperature based dry point (D.P) detector (dry point detection sensor needs to be purchased separately)

(12) Distillation condition setting: Menu selection formula: Number of menus: 10

(13) Pressure setting: There are two methods: automatic setting through a pressure detector (purchased separately) and manual setting through a display screen.

(14) Cooling and heating of condenser tubes: compressor cooling and electric heating methods.

(15) Receiver cooling and heating: compressor cooling and electric heating methods.

(16) Heating: Nickel chromium wire heating tube. 220V 1KW

(17) Heater cooling method: forced air cooling

(18) Printing: Thermal printer, can be connected to a standard A4 paper color inkjet printer for printing distillation curves

(19) Test ending conditions: The following four conditions are available for selection:

a. The experiment ends at the endpoint;

b. The experiment ends when it is dry;

c. The experiment ends when the distillation yield is reached;

d. The experiment ends when the temperature is reached.

(20) End of experiment notification: After the experiment is completed, the buzzer will sound for 5 minutes (10 seconds), and then cool down for 10 minutes before the printer prints out the test conditions and data.

(21) Abnormal situation indicates that the alarm sounds and the display screen shows the fault content.

(22) Fully automatic calibration function

·Distillation temperature correction

·Cold bath temperature correction

·Temperature correction of measuring cylinder chamber

·Environmental temperature correction

·容量校正

·Atmospheric pressure correction

·Time correction

(23) Power supply: AC-220V, 50/60Hz, 1500W

(24) Size/Weight:

400W×580D×700H(mm)； About 40kg

Standard Accessories

Flask support plate aperture: Φ 38, Φ 50

Distillation flask 125mL

Distillation flask 100mL

Measuring cylinder (with seat) 100mL

Distillation bottle stopper temperature/dry point use

Temperature sensor platinum resistance Pt100

Dry point sensor CRC thermocouple

Clamp Φ 12

Silicone rubber sleeve (distillation bottle outlet)

Fuses 16A and 32A

Thermal printing paper roll

Optional parts:

Distillation flask 250mL (10% distillate)

Measuring cylinder (with seat) 200mL (10% distillate)

Distillation flask 200mL (ASTM D850, D1078)

Flask support plate Φ 25mm (ASTM D850)

(Dry point) Silicone rubber plug (ASTM D850, D1078)

Dry point detection sensor (ASTM D850, D1078)

Temperature detection sensor (ASTM D8 50, D1078)

Distillation flask stopper calibration

Calibration thermometer (standard thermometer, calibration thermometer)

As needed, the company may make changes to the specifications and appearance of the instrument without prior notice. We hope for your understanding.