Automatic lifting fiber disintegrator

NegotiableUpdate on 02/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The automatic lifting fiber disintegrator is suitable for the dissociation and dispersion of plant fibers such as wood pulp, bamboo pulp, cotton pulp, hemp pulp, and waste paper pulp. It is also suitable for the dissociation and dispersion of polymer synthetic fibers and polymer artificial fibers, such as aramid fibers, PET fibers, PPS fibers, Tencel fibers, acetate fibers, etc. It is also suitable for the dissociation and dispersion of inorganic fibers, such as glass fibers, ceramic fibers, carbon fibers, mineral fibers, etc.

Product Details

Automatic lifting fiber disintegrator(also known as standard fiber disintegrator or standard fiber agitator) is a standard disintegrator that dissociates bundled fibers into single fibers by high-speed rotation of pulp fibers in water. Preparation of test samples for manual paper making, determination of water filtration degree, and screening

Fiber dissociation disperser is suitable for the dissociation and dispersion of plant fibers such as wood pulp, bamboo pulp, cotton pulp, hemp pulp, waste paper pulp, etc. It is also suitable for the dissociation and dispersion of polymer synthetic fibers and polymer artificial fibers, such as aramid fiber, PET fiber, PPS fiber, Tencel, acetate fiber, etc. It is also suitable for the dissociation and dispersion of inorganic fibers, such as glass fiber, ceramic fiber, carbon fiber, mineral fiber, etc.

FFiber Disperser 01S is a specialized device for fiber dissociation and dispersion. The fiber dissociation and dispersion device is produced according to the process technology requirements of GB/T 24327 "Laboratory wet dissociation of pulp - Chemical pulp dissociation", ISO 5263 "Pulp - Laboratory wet dissociation - Disintegration of chemical pulp", JIS P822-1 "Pulp - Laboratory wet dissociation - Part 1: Disintegration of chemical pulp 1", TAPPI-T 205 sp-02 "Forming hand sheets for physical tests of pulp", and is specifically used for laboratory wet dissociation and dispersion equipment. The fiber disperser produced by FAOBO meets all the requirements of standards such as GB/T 24327, ISO 5263, JIS P822-1, TAPPI-T 205 sp-02, etc.

Automatic lifting fiber disintegratorFunction Configuration

1. Transparent slurry bucket

2. Control structure of lifting mixing chamber

3. Double layer waterproof structure with waterproof layer, enhancing service life

4. Integrated design of motor and shaft, reducing the noise impact caused by traditional belt control shaft

5. One click control to lower the upper part of the mixing chamber, and automatically start dispersing fibers according to the set speed after the descent is in place

6. After dispersion is completed, the mixing chamber will automatically rise and the slurry bucket can be removed

7. The number of dissociation times can be freely set according to the type of pulp

Technical parameters:

technical indicators	Detailed technical specifications
Model:	Fiber Disper 01S
Name	Fiber dissociation disperser
Applicable range of beating degree	Absolute filtration performance (4~96) ° SR
Container inner diameter size	Φ(152±2) mm×H(191±2)mm
Slurry concentration	0.8% or 1.2% or 2.2%k
container volume	About 3.0L
Mixing chamber	Transparent material mixing chamber, and the slurry guide strip is also made of transparent material
Power structure	Brushless motor and shaft integrated design, reducing noise impact, no belt design enhances service life
sealing protection	Drive shaft belt isolation film
lifting method	Electric pneumatic spring drive, automatic lifting control operation
safety protection	Button type one key control for descent, release the button midway to automatically return, and one key control to automatically start mixing when reaching the designated position
Rotation speed setting	1~99999999r
Slurry chassis	06Cr19Ni10 anti-corrosion platform
Inner baffle spiral	Internal spiral structure: 6.5 * 6.5 * 51 * 4
Height on the baffle	(57±1) mm
Height under the baffle	(32±1) mm
Hydraulic pressurization	Hydraulic shearing with 6mm pressure
Mixing impeller speed frequency	(48.3±1.65)S- 1
Mixing speed (standard)	(2975~3000) r/min
Rotating diameter	φ90
Inverted radius	R=0.8mm
Inverted radius at the end	R=4.0mm
Overall dimensions	450×265×395mm
power supply	220V ，50HZ ，500W

Execution Standard:

GB/T 24327 "Wet dissociation of pulp laboratory - Chemical pulp dissociation"

ISO 5263 《Pulps—Laboratory wet disintegration—Disintegration of chemical pulps》、JIS P8220- 1 《 Pulps - Laboratory wet disintegration - Part 1 ：Disintegration of chemical pulps1》

TAPPI-T 205 sp-02 《Forming hand sheets for physical tests of pulp》