Atos pressure sensor E-ATR-8/160/I

Atos pressure sensor E-ATR-8/160/I

Brand? : ATOS (Atos)
Model number? ：E-ATR-8/160/I
Type? Pressure sensor (with current output, usually 4-20mA or 10mA)
Measurement range? 160 bar (some sources mention a maximum of 400 kPa, but considering the context, it should be 160 bar)
Output signal? Analog current signal (such as 10 mA or 4-20mA), depending on the suffix "I"
Power supply voltage? Usually 24 V DC
Interface size? : Commonly seen as 6mm or M10 × 1 threaded interface
Applicable medium? : Hydraulic oil
Accuracy level? Level 1 (marked by some suppliers)
Explosion proof rating? Level 1 (marked by some suppliers)
Product features
High reliability, suitable for harsh industrial environments
Strong anti-interference ability, suitable for connecting to control systems such as PLC

E-ATR-8 pressure sensor
Analog type, used for open-loop and closed-loop systems
E-ATR-8
This pressure sensor detects the static and dynamic pressure of hydraulic oil and outputs corresponding voltage or current signals.
The sensor is composed of an internal resistance bridge circuit ①, which has the characteristics of high overload resistance and peak voltage resistance.
Integrated electronic circuits provide an amplified voltage or current signal output. The output signal is proportional to the hydraulic pressure,
And it has a temperature drift compensation function.
E-ATR-8 is equipped with a pressure controlled digital proportional valve with integrated sensors and amplifiers, of REB/RES type.
It can also be used in conjunction with other Atos digital proportional valves to form closed-loop pressure control:
Used in conjunction with PE (R) S-type variable axial piston pump (see sample AS170 section)
·Directional control valve with additional pressure closed-loop control, SP and SF options, TES/LES type
(See sample FS500 section) Characteristics:
Factory preset and calibration
Standard 5-pin M12 plug ③ protection level is IP67
CE mark with EMC standard certification
Key Features
Pressure measurement range 0~60/100/160/250/400 bar; Note: Negative pressure can damage the pressure sensor
Overload pressure twice the full range, not exceeding 600 bar
Burst pressure 5 times full range, not exceeding 1700 bar
Response time 2 ms
Temperature range: working temperature -40 ℃~+100 ℃; Storage temperature -40 ℃~+100 ℃; Oil temperature -40 ℃~+100 ℃
Temperature drift @ zero point: ≤+0.025% FS/Cmax; @Full degree: ≤+0.025% FS/Cmax
Accuracy ≤± 1.2% FS
Nonlinear ≤ 0.5% FS (BFSL) complies with IEC61298-2
Hydraulic oil with medium compatibility in accordance with DIN 51524... 535 standards;
The power supply is rated at 24 VDc, with standard models ranging from 14 to 30 VDc (options/8 to 30 Voc); lmax 25mA
Output signal standard: voltage output signal 0~10V (3 pins), small load>large output signal/1mA options: current output signal 4~20mA (2 pins), large load ≤ (power supply -8V)/0.02mA
Wiring protection to prevent reverse polarity of power supply or short circuit of output signal
Wet part of material: stainless steel 316L (sensor part is 13-8 PH); Sealing: FPM/FKM
Weight approximately 57g
The electromagnetic compatibility standard (EMC) complies with the 2014/30/UE specification; Anti interference (Group 1, Class B) and anti magnetism (for industrial applications) EN61326
Service life 1x10 load cycle
MTTF>100 years
Compliance with RoHs Directive 2011/65/EU, new version 2015/65/EUREACH Regulation (EC) n ° 1907/2006
Shock resistance 20g DIN EN 60068-2-6 standard 20~2000Hz
Anti vibration performance 40g/6ms/half sine curve DIN EN 60068-2-27 standard
Protection level IP67 with interchangeable plug
Hydraulic connection 1/4 "GAS DIN 3852 (pressure hole 0.6mm)
Electrical connection type: 5-core M12 90 degree (DIN 43650-C standard) with PG7 sealed cable clamp, cable diameter 6mm; protection level: EN 60529 standard, IP67 ; Insulation level VDE 0110-C standard
Note: FS=Full Scale; BFSL=Best Fit Curve
Installation and debugging
Warning
The E-ATR-8 sensor must be installed as close as possible to the pressure measurement point, taking note that the oil flow is not turbulent.
debug
Install the pressure sensor on the hydraulic pipeline.

Atos pressure sensor E-ATR-8/160/I

E-ATR-7/250/-10
E-ATR-7/250/I 10
E-ATR-7/400/-10
E-ATR-7/400/I 10
E-ATR-8/60/-10
E-ATR-8/60/I-10
E-ATR-8/100/-10
E-ATR-8/100/I 10
E-ATR-8/160/-10
E-ATR-8/160/I 10
E-ATR-8/250/- 10
E-ATR-8/250/I 10
High priced sales of Italian ATOS products, including ATOS amplifiers, ATOS proportional valves, ATOS plug valves, ATOS solenoid valves, ATOS superposition valves, ATOS conventional valves, ATOS cylinders, ATOS gear pumps, ATOS plunger pumps, ATOS blade pumps, and ATOS hydraulic valves. Features: Italian ATOS solenoid valves, ATOS solenoid valves, ATOS solenoid valve manufacturers, ATOS solenoid valves, ATOS solenoid valve samples, ATOS solenoid directional valves, ATOS proportional relief valves, ATOS proportional pressure reducing valves, ATOS hydraulic valves, ATOS hydraulic component electronic gears. ATOS amplifier, ATOS vane pump, ATOS gear pump, ATOS oil pump, ATOS stacked check valve, ATOS explosion-proof solenoid valve, ATOS throttle valve, ATOS proportional valve, ATOS hydraulic.