-
E-mail
543379427@qq.com
-
Phone
18603928848
-
Address
Qibin District, Hebi City, Henan Province
Product Categories
Hebi Aowei Electronic Technology Co., Ltd
Ash Melting Tester
NegotiableUpdate on 01/01
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The ash melting tester produced by Anwei Electronic Technology Co., Ltd. in Hebi City is suitable for various fields such as coal, chemical industry, solid waste, cement, school teaching, etc. Our products provide users with high-quality and affordable instruments and equipment with standardized design, strict management, and refined manufacturing, and updated, higher, and better standards. The advantages of repeatability, long-term stability, and measurement time are obvious.
Product Details
Usage environment: Environment temperature: 0-40 ℃ Relative humidity: ≤ 80% RH Temperature: 1600 ℃ Measurement error: ± 3 ℃ Heating rate: 15-20 ℃/min before 900 ℃ Output current: ≤ 30A Power supply voltage: AC220 (1 ± 10%) V, 50Hz Test atmosphere: oxidizing or weakly reducingAsh Melting TesterDaily maintenance and upkeep: 1. The sample should be fine enough (below 0.1mm); When making a gray cone, the tip of the gray cone should be kept intact; When pasting the gray cone, the gray cone should be perpendicular to the gray cone support plate; The bonded ash cone can only be put into the experiment after drying; 4. Keep the quartz plate, lens and other optical components clean; 5. To ensure the accuracy of the results, manual judgment can be made based on the specific situation from the images saved in the database; 6. High temperature furnaces should not maintain a constant temperature for a long time; 7. Components such as silicon carbon tubes should be replaced regularly; When the instrument cannot function properly due to abnormal circumstances, it should be dealt with before use.
