- Phone
-
Address
No. 543 Shanghai Road, Nanchang City
Product Categories
Nanchang Kexin Sample Preparation Equipment Co., Ltd
Analytical sample grinder
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The laboratory sample grinder is used to crush various experimental samples with a certain hardness, and after rapid grinding, they are directly subjected to component analysis and testing.
Product Details
Product Name: Sealed Laboratory Sample Grinding Machine
Introduction Description
This machine is used to crush various experimental samples with a certain hardness, and after rapid grinding, they are directly analyzed and tested for composition.
Figure 1
Type I lightweight compression device Type II lightweight compression device Figure 2 of Type III Lightweight Compression Device
Mainly used in sectors such as coal, electricity, metallurgy, non-ferrous metals, chemical industry, geology, etc.
High speed impact friction achieves faster sample preparation results.
Fully sealed design, low noise, no dust pollution, in line with environmental requirements.
Good stability, placed on a level ground, no need for foundation fixation.
The motor is specially manufactured and equipped with protective circuits, resulting in a longer service life.
Digital intelligent time control, set according to the required initial settings, no need to set the time before each operation, press the start switch to work, automatically reset; The operation is safer and more convenient.
Dust removal devices can be equipped according to user needs.
Chemical sample grinder?mainTechnical parameters are required
| model | Number of samples prepared at once (pieces) | Loading particle size (mm) | Loading amount (g/bowl) | Crushing time (min) | Discharge particle size (mesh) | Motor power (kw) |
| KX100-1 | 1 | ≤13 | 100 | 1-3 | 80-200 | 1.1 |
| KX150-1 | 1 | ≤13 | 150 | 1-3 | 80-200 | 1.1 |
| KX100-2 | 2 | ≤13 | 100 | 1-3 | 80-200 | 1.5 |
| KX150-2 | 2 | ≤13 | 150 | 1-3 | 80-200 | 1.5 |
| KX100-3 | 3 | ≤13 | 100 | 1-3 | 80-200 | 1.5 |
| KX150-3 | 3 | ≤13 | 150 | 1-3 | 80-200 | 1.5 |
| KX100-4 | 4 | ≤13 | 100 | 1-5 | 80-200 | 1.5 |
| KX100-7 | 7 | ≤13 | 100 | 1-6 | 80-200 | 1.5 |
| KX200-1 | 1 | ≤20 | 200 | 1-3 | 80-200 | 1.5 |
| KX200-2 | 2 | ≤20 | 200 | 1-5 | 80-200 | 1.5 |
| KX400-1 | 1 | ≤26 | 400 | 1-5 | 80-200 | 1.5 |
| KX1000-1 | 1 | ≤26 | 1000 | 1-5 | 80-200 | 1.5 |
