American ATI aerosol generator

Title: ATI Aerosol Generator from the United States

Product Overview

American ATI aerosol generator American ATI aerosol generator

ATI-5C Aerosol Generator

Characteristics of 5C aerosol generator:
Wide airflow range (500-65000 CFM)
Adjustable concentration
Large capacity dust production (can be detected continuously for 4 hours)

Introduction to 5C Aerosol Generator:
5C can generate air suspension particles with various diameter distributions. The principle is to add a certain amount of water-soluble collagen liquid to a large hot area, evaporate the liquid and recombine it. Under a pressure of only 5 pounds, a small amount of inert gas is sent out to form air suspension particles with multiple diameters. When used in conjunction with photometers such as TDA-2G or TDA-2H, TDA-5C can generate aerosols and provide sufficient challenging particles to measure efficient filtration systems (flow range from 1500-65000 cubic feet per minute).
The 5C has both control and display functions on the front panel. This is a large capacity aerosol generator that can operate continuously for 4 hours without the need for refilling. Its digital temperature control allows operators to set the temperature required for suspended particles in the most suitable environment.
5C is a multi-purpose portable aerosol generator that generates heat It is an ideal scenario with a wide range of requirements for aerosol concentration or volume variation Such as large clean rooms, or in places where compressed air cannot be provided TDA-5C provides a high-capacity solution for some demanding industry applications, such as independent filter testing, commercial applications in nuclear facilities, pharmaceutical manufacturing, medical equipment applications, and other applications When verifying cleanrooms, testing efficient filtration systems, or individual filtration devices, TDA-5C is your choice.

Technical parameters of 5C aerosol generator:
The system air volume requirement is 1500-65000 cubic feet per minute (2547-110370 cubic meters per hour)
Suspended particle concentration of 10 micrograms per liter at a flow rate of 65000 cubic feet per minute
Suspended particle concentration of 100 micrograms per liter at a flow rate of 6500 cubic feet per minute
Type of steam condensation
Compressed air is not required
Compressed gas (inert gas) at 20 cubic feet per hour under a pressure of 50 psi
Gas types, particles with multiple diameters
Size 35cm X 25cm X 25cm (LXH)
Weight 9.1 KG
Power supply 110 VAC/60 Hz or 220 VAC/50 Hz