All stainless steel spray dryer ZQ-6000S

NegotiableUpdate on 12/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Description: Suitable for the production of trace particle powders in universities, research institutes, and laboratories of food, pharmaceutical, and chemical enterprises. It has wide applicability to all solutions such as emulsions and suspensions, and is suitable for drying thermosensitive substances such as biological products, biopesticides, enzyme preparations, etc. Because the sprayed material only experiences high temperature and instant heating when sprayed into a mist, these active materials maintain their active ingredients unchanged after drying. Specifically used in the following fields: beverages, spices and pigments, milk and egg products, plant and vegetable extracts, pharmaceuticals, synthetic thermosensitive substances, plastics, polymers and resins, aromatic agents, blood products, ceramics and superconductors, biochemical products, dyes, soaps and detergents

Product Details

Product Introduction

Small spray dryerMain features:
Original imported nozzle with high efficiency.
Color large touch screen operation, combining fully automatic control and manual control, with Chinese and English panels and parameter LCD display.
Real time PID constant temperature control technology, accurate temperature control, heating and temperature control accuracy ± 1 ℃.
● The spray, drying and collecting devices are made of high-quality stainless steel, and the whole spray drying experiment process is visible with an observation window.
● The atomization structure of two fluid spray is made of high-precision 316 stainless steel, and the particle size of the powder is normally distributed, with good fluidity.
The jet injector automatically clears (needle through) and has an adjustable frequency. When the nozzle is blocked, it will automatically clear to ensure the continuity of the experiment.
The feeding amount can be adjusted through the feeding peristaltic pump.
● Unique protection function, the fan cannot start and the heater cannot start.
Built in oil-free air compressor with a noise level of less than 50db.
Equipped with an air inlet filter to ensure the purity of the sample.
After drying, the product has uniform particle size, with over 95% of the dry powder in the same particle size.

Small spray dryerTechnical Specifications:

1. Inlet air temperature control: 30-300 ℃
2. Air outlet temperature control: 30-150 ℃
3. Evaporation water volume: 1500mL/H to 2000ml/h
4. Feed rate (large): 2000mL/H

5. Feed quantity (small): 50mL

6. Feeding method: peristaltic pump adjustment

7. Average drying time: 1.0~1.5 seconds

8. Electric heater power: 4KW AC220V single-phase grounded
9. Fan: 0.2KW maximum air volume 5.6m3/min maximum air pressure 1020Pa
10. Air compressor: 0.2KW maximum gas production of 4.2 m3/h
11. Compressed air working pressure: 2-3Bar

12. Equipment dimensions: 1200mm (height) × 650mm (length) × 500mm (width)
13. Nozzle diameter: 1.00mm
14. Equipment weight: 130KG
Small spray dryerconfiguration

1. Nebulizer; 2. Large clamp; 3. Exhaust pipe; 4. Lock nut; 5. Cyclone separator; 6. No.1 clamp; 7. Collecting bottles; 8. Large clamp; 9. Peristaltic pump; 10. Drying room; 11. Touch screen; 12. No.2 clamp; 13. Power switch; 14. Feed pipe; 15. No. 3 clamp; 16. Collection tube

3、 Random component
Number, Name, Quantity
1 Stainless steel drying chamber 1
2 Stainless Steel Cyclone Separators 1
3 stainless steel sample collection bottles 1
4 Stainless steel waste collection pipe 1
5 material conveying silicone tube 6mm 2m1

6 316 stainless steel nozzle 1
7 Stainless steel clamps 4