- Phone
-
Address
Room 505, Building C, Hongdu Business Building, 45 District, Bao'an District, Shenzhen
Product Categories
Shenzhen Bonard Precision Instrument Co., Ltd
ALPHALAS actively Q-switched DPSS solid-state laser
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
PULELAS-A-1064-500 is an actively Q-switched sub nanosecond diode pumped solid-state (DPSS) laser produced by ALPHALAS GmbH in Germany. PULSELAS-A-1064-500 ALPHALAS active Q-switched DPSS solid-state laser
Product Details
Shenzhen Bonard Precision Instrument Co., Ltd. is an imported instrument channel supplier, with products including ALPHALAS lasers, laser power meters, beam analyzers, beam collectors, spot analyzers, high-power continuous zoom fiber laser collimation heads FAC, German GTE, German HHB Electronic, Pacific Lasertec helium neon lasers, SRS Stanford amplifiers, Scitec optical choppers, AA Lab Systems equipment, DL Instruments amplifiers and other professional equipment. If you have any needs, please contact us for consultation.
PULSELAS-A-1064-500
PULELAS-A-1064-500 is an actively Q-switched sub nanosecond diode pumped solid-state (DPSS) laser produced by ALPHALAS GmbH in Germany.
characteristic
Proactively adjust Q
compact
Design of Electro optic Micro Q-switching Switch
1047, 1053, 1062, 1064 nm sub nanosecond pulses
Extremely low jitter (typical value<500 ps, optional 200 ps rms)
Pulse energy up to 100 µ J (with MOPA up to 1 mJ)
Peak power up to 150 kW
Maximum repetition frequency of 100 kHz
Average power greater than 1 W
Variable frequency output to 266, 355, 473, 532, 671 nm (optional configuration)
Technical Specifications
| model | PULSELAS-A-1064-500 |
|---|---|
| Wavelength (nm) | 1064 |
| Single pulse energy (µ J, typ.) | 40 @ 1 kHz |
| Average power at maximum repetition rate (mW) | type. 500 @ 25 kHz |
| Pulse width (ns) | 1.0–1.5 |
| Repetition frequency (kHz) | 0–25 |
| Beam mode | TEM₀₀ |
| Polarization ratio | >100:1 |
| Beam diameter (mm) | 0.3 |
| Beam divergence angle (mrad, full angle) | type. 3 |
| Power instability (% rms, 1 hour) | <3 |
| Working temperature of heat sink (℃) | +18…+30 |
| Laser head size (width x height x length, mm ³) | 40×52×140 |
| LD&TEC driver model/size (mm ³) | LDD1‑1T‑D 105×65×100 |
| Puckel Box Driver Model/Size (mm ³) | PCD‑1002 105×44×100 |
| Working temperature (℃) | +18…+30 |
| Storage temperature without humidity (℃) | -10…+50 |
application
material processing
Microfabrication
Marking and cutting of superhard materials (such as diamond)
nonlinear optics
Supercontinuum generation
Time-resolved fluorescence measurement
DNA analysis
Lidar and Laser Ranging
pollution monitoring
Laser induced breakdown spectroscopy (LIBS)
Internal combustion engine and mixed gas ignition
ALPHALAS GmbH, Germany
ALPHALAS GmbH is a German laser manufacturer founded in 1997 and located in the university town of G ö ttingen. Dr. Krasimil Stankov, the founder and president of ALPHALAS, has over 35 years of experience in the development of lasers and laser systems.
ALPHALAS' main business includes the research and development, production, and sales of lasers, laser systems, laser related electronic products, and components. The main products are advanced mode-locked, continuous wave, and Q-switched diode pumped solid-state lasers. ALPHALAS focuses on short pulse (sub nanosecond, picosecond, and femtosecond) and microchip design, but we also offer almost all common high-efficiency, compact diode pumped solid-state lasers.
PULSELAS-A-1064-500ALPHALAS actively Q-switched DPSS solid-state laser
PULSELAS-A-1064-500ALPHALAS actively Q-switched DPSS solid-state laser
Similar Product Recommend
