AC/DC electronic load AEL-5000

The AEL-5000 series AC/DC electronic load is equipped with precise measurement circuits such as 16 bit A/D and DSP, providing accurate measurement values. The measurement items include voltage root mean square value (rms), current root mean square value (Arms), watt value (Watt), volt ampere (VA), peak factor (CF), power factor (PF), harmonic distortion rate (THD), voltage total harmonic distortion rate (VTHD), current total harmonic distortion rate (ITHD), peak current (lpeak), maximum current value (Amax), minimum current value (Amin), maximum voltage value (max), and minimum voltage value (min). In addition to these measurement functions, it also provides time measurement, including the tripping or melting time of products such as UPS, fuses, and circuit breakers, as well as the transfer time of Of line UPS. The AC rectification mode of the AEL-5000 series AC/DC electronic load fully complies with the IEC testing specifications for UPS and PVInverter, namely IEC62040-3UPSEficiencyMeasurementnon- LinearandIEC61 683ResistivePlusNon-Linear。 The AC rectification load mode of the AEL 5000 series uses CC+CR load mode and maintains the THD of the current at 80% to simulate the electronic devices connected to the actual PV inverter. The AEL-5000 series AC/DC electronic load has built-in testing modes for various products, including AC UPS, inverter, Fuse/Breaker, ACPowerSource, and DC Battery, Fuse/Breaker, DCPowerSource, etc. The AEL-5000 series load adds two types of battery discharge tests, TYPE1~TYPE3. You can choose the appropriate battery test mode according to your needs, and the test results can be directly displayed on the LCD monitor, including the AH capacity of the battery, the voltage value after discharge, and the cumulative time of discharge. The AEL-5000 series load provides multiple parallel and three-phase application functions, allowing users to perform testing applications with higher power or three-phase AC power. This allows for more flexible and elastic use of the AEL-5000 series AC electronic load to save costs. Operate in parallel with one three-phase system On top of that, users can operate the Master as if it were a standalone machine, and Slave1 and Slave2 will automatically adjust the load and volume accordingly. The ABL-5000 series AC/DC electronic load has developed the FuseTest function specifically for testing and verifying current protection components, which can be tested and verified using an electronic load with a rated current and power. When Turbomode is set to ON, the test current can be doubled to twice the rated current within 1 second of testing.