AA/S 4.1  Analog driver, 4-channel

AA/S 4.1 Analog Driver, 4-channel

Extended product type: AA/S4.1
Product Code: 2CDG120005R0011
EAN：4016779658867
Catalog description: AA/S4.1 simulation actuator, 40% off, MDRC
Detailed description: The analog actuator has 4 analog outputs and converts KNX telegrams into analog output signals. The output is parameterized by software for voltage or current signals. By using the AAM/S analog actuator module, the number of analog outputs can be increased to 8. The device requires an external 24V AC power supply, such as TS 25/12-24 C (2CSM251043R0811).

ABB i-bus 6138/11-83-500Intelligent temperature control panel smart homeKNX/EIBBest Seller

ABBsmart homei-bussystem Intelligent Building Control System

KNX/EIBbus system Smart Panel

DeyunSOLOseries type number:6138/11-83-500

Functional Description：beltLCDDisplay, built-in bus coupler, no need to configure borders. Can be paired2、4Controlled fan coil unit

Control, the panel is set to on/Off button, wind speed adjustment button, temperature control button.

(High)81 wide81 deep20）

genuineABB i-busLighting control systemSA/S4.16.2.1

SV/S 30.160.1.1Power supply device,160mAStandard rail installation
SV/S 30.320.1.1Power supply device,320mAStandard rail installation
SV/S 30.640.3.1Power supply device,640mAStandard rail installation
SU/S 30.640.1Uninterruptible power supply,640mAStandard rail installation
SU/S 30.640.1Uninterruptible power supply,640mAStandard rail installation
SV/S30.320.2.1Power supply unit with diagnostic function,320mAStandard rail installation
SV/S30.640.5.1Power supply unit with diagnostic function,640mAStandard rail installation
DR/S 4.1rate limiter,Standard rail installation
NT1On site programming system power supply,28VDC,30mA
NT/S 12.1600Power supply device,12VDC，1.6AStandard rail installation
NT/S 24.800Power supply device,24VDC，0.8AStandard rail installation
LK/S4.2Line coupler, standard rail installation
IPR/S 2.1 IPRouter, standard rail installation
IPS/S 2.1 IPInterface, standard rail installation
IPM/S 1.1 IPmodule
USB/S 1.1 USBinterface module,Standard rail installation
LL/S 1.1Fiber optic interface, standard rail installation
DSM/S 1.1Bus diagnosis and protection module, standard rail installation
US/E 1surge protector
RM/S 1.1Room control module,basic type,Standard rail installation
RM/S 2.1Room control module,Extended type,Standard rail installation
BE/S 4.20.2.1Dry contact input module,4Road, standard guide rail installation
BE/S 4.230.2.1 10~230V AC/DCInput module,4Road, standard guide rail installation
BE/S 8.20.2.1Dry contact input module,8Road, standard guide rail installation
BE/S 8.230.2.1 10~230V AC/DCInput module,8Road, standard guide rail installation
US/U 12.2Universal interface,12Road, concealed installation
US/U 2.2Universal Interface, tworoad,concealed installation
US/U 4.2Universal interface,4Road, concealed installation
AE/A 2.1Analog input module,2Road, on-site installation
AE/S 4.1.1.3Analog input module, fourroad,Standard rail installation
DG/S 1.1 DALIGateway,1Channel alone+1Channel broadcast control, standard rail installation
DG/S 1.16.1 DALIGateway,1The road,16Group,64aDALIcomponent,Standard rail installation
DG/S 8.1 DALIgateway, eightroad,Standard rail installation
DGN/S 1.16.1 DALIGateway,1Road with emergency lighting control, one hundred and twenty-eightaDALIcomponent,Standard rail installation
DLR/S 8.16.1M DALIGateway,1The road,64aDALIcomponent, eightroadLF/U2.1input channel,Standard rail installation
LM/S 1.1Logic Module,3通道,Standard rail installation
ABL/S 2.1Logical application unit,Standard rail installation
ABZ/S 2.1Time Application Unit,Standard rail installation
FW/S 8.2.1Timing controller,8通道,Standard rail installation
FAD/A 1.1 DCFTime receiver,on-site installation
FAG/A 1.1 GPSTime receiver,on-site installation
PK/E 2.1 OBELISK top2memory card
PS/E 2.1 OBELISK top2Time receiver
TG/S 3.2Controller, standard configuration, no wiring, standard rail installation,cooperate, coordinate, collaborateTG/Z 1.1use
TG/Z 1.1Controller wiring
UK/S 32.2GeneralI/OConcentrator,32Road, standard guide rail installation
CP-D 24/2.5Power supply device,24VDC，2.5AStandard rail installation
SE/S 3.16.1Energy management drivers,3Road, standard guide rail installation
EM/S 3.16.1Energy management module,3Road, standard guide rail installation
ZS/S 1.1Meter interface, standard rail installation
SMB/S 1.1Fault signal monitoring module,Standard rail installation
EUB/S 1.1System component monitoring unit, standard rail installation
BDB/S 1.1Loop timing and counting unit, standard rail installation

drive
SA/S 4.6.1.1Switch driver,4The road,6AStandard rail installation
SA/S 8.6.1.1Switch driver,8The road,6AStandard rail installation
SA/S 12.6.1.1Switch driver,12The road,6AStandard rail installation
SA/S 2.10.2.1Switch driver,2The road,10AStandard rail installation
SA/S 4.10.2.1Switch driver,4The road,10AStandard rail installation
SA/S 8.10.2.1Switch driver,8The road,10AStandard rail installation
SA/S 12.10.2.1Switch driver,12The road,10AStandard rail installation
SA/S 2.16.2.1Switch driver,2The road,16AStandard rail installation

genuineABB i-busLighting control systemSA/S4.16.2.1