-
E-mail
sdnjyxb@163.com
- Phone
-
Address
West Exit of Huanghe Avenue, Mengjin County, Henan Province
Product Categories
Luoyang Sida Agricultural Machinery Co., Ltd
9ZR-6 type cutting and kneading machine
NegotiableUpdate on 10/24
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Powered by an electric motor (single cylinder diesel engine, four-wheel tractor, or agricultural tricycle). The power is transmitted to the main shaft, and the gear at the other end of the main shaft transmits the speed regulated power to the grass roller through a gearbox, universal joint, etc. When the material to be processed enters between the upper and lower grass rollers, it is clamped by the grass roller and sent into the cutting mechanism at a certain speed. After being chopped by the high-speed rotating blade, it is thrown out of the machine through the grass outlet.
Product Details
【working principle】
Powered by an electric motor (diesel engine or wheeled tractor). The power is transmitted to the main shaft, and the active V-belt wheel at the other end of the main shaft transmits the speed regulated power to the grass roller through a V-belt, clutch wheel, gearbox, universal joint, chain, etc. When the material to be processed enters between the upper and lower grass rollers, it is clamped by the grass roller and sent into the cutting mechanism at a certain speed. After being chopped by the high-speed rotating cutter head, it is thrown out of the machine through the discharge port.
| project | 9ZR-6 type cutting and kneading machine | ||
| matching power | motor | Rated power (kW) | 18.5 |
| Rated speed (r/min) | 1470 | ||
| Overall dimensions | Transportation dimensions: length x width x height (mm) | 928×1285×1500 | |
| Usage size: length x width x height (mm) | 3195×2380×2840 | ||
| Whole machine weight (kg) | 540 | ||
| Rated speed of spindle (r/min) | 930 | ||
| productivity | ≥6t/h (dry straw) | ||
| Rotor diameter (without hammer) (mm) | 1004 | ||
| Rotor width (mm) | 300 | ||
| Working diameter of rotor (mm) | 1004 | ||
| Number of Hammer Plates | 34 | ||
| Feeding method | Axial chain automatic feeding | ||
| Number of blades | 2(Moving knife), 1 (Fixed knife) | ||
| project | data | |
| Productivity (cutting length 16mm, under continuous and uniform feeding conditions) | Green straw (moisture content 60%) | ≥9 t/h |
| Dry straw (moisture content of 20%) | ≥6 t/h | |
| Grass cutting length | Two moving knives | 18,27,37,52(mm) |
| Finished material blowing distance | 5～8(m) | |
