-
Phone
19121633710
-
Address
Room 413, Building 1, No. 111 Real Estate Road, Pudong New Area, Shanghai
Product Categories
Shanghai Hai Hai Optoelectronics Technology Co., Ltd
785nm Raman spectrometer RK785-I (basic model)
NegotiableUpdate on 01/09
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
A brief introduction: The 785 Raman spectrometer is mainly suitable for research on Raman spectroscopy principles and applications in universities, research institutions, and enterprise development stages. The Raman spectrometer is equipped with three products, namely RK785-I, RK785-II, RK785-III。 Modular design facilitates customers' free combination, iterative upgrading, and secondary development.
Product Details
The 785 Raman spectrometer is mainly suitable for research on Raman spectroscopy principles and applications in universities, research institutions, and enterprise development stages. The Raman spectrometer is equipped with three products, namely RK785-I, RK785-II, RK785-III。 Modular design facilitates customers' free combination, iterative upgrading, and secondary development.
description
Product parameters |
|
| project | value |
| Product parameters | RK785-I (basic model) |
| Core components | Laser785-0.08-500-FC-3A RPB785-1.5-FS XS11639-790-1050-25-1A |
| parts | SH-LQD-ADJ SH-RAM-FFP SH-RAM-D10 |
| Core indicators | Resolution:< 10 cm-1 frequency shift indication error:< 3 cm-1 frequency shift repeatability:< 1 cm-1 laser wavelength: 785 ± 0.5nm laser linewidth: 0.08nm probe filter cut-off depth: OD8 spectral signal-to-noise ratio: 300:1 (according to spectrometer evaluation indicators) CCD: Hamamatsu 11639 |
| CCD | Hamamatsu 11639 |
| Spectral Range | 200-3000cm-1 |
Spectral Example
Other information
Operation steps
1. Install on the computerUspectralPro and OHLaserDuring the software installation process, the drivers for the spectrometer and laser will be automatically installed;
2. WillRK785After the Raman system is set up, useUSBThe data cable connects the spectrometer, laser, and computer.
3. Open itUspectralPro and OHLThe aser software is used for spectrometer and laser parameter control (see UspectralPro and O for detailed instructions)HLUser Manual for ASR Software);
4. After installing the required sampling accessories on the probe, align the probe with the sample and operate itUspectralPro software collects data from the samples to be tested;
After collecting the data, it can be usedUspectralPro software is used for data processing.
application area
vRaman detection
vDrug stimulation
vMedical analysis
vMaterial analysis
vOptical Experiment Teaching
vSpecial scientific research
