750ml 3-layer 6-die dual station fully automatic hollow blow molding machine

NegotiableUpdate on 06/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The B10D-560 (4+4) double-layer fully automatic bottle blowing machine is based on a precise calculation of the die head flow channel design. It is streamlined and has no dead corners, and can quickly change colors to ensure low back pressure, effectively extending the service life of the extrusion system and gearbox. The multi cavity die head of the B10D-560 (4+4) double-layer fully automatic bottle blowing machine has a reasonable distribution of flow channels, and the flow rate can be easily adjusted. The Star Bell bottle blowing machine adopts a single-layer die head with a double-layer compensating diversion shuttle. All types of bottle blowing machines have a die head that can increase the visible liquid level line design

Product Details

The B10D-560 (4+4) double-layer fully automatic bottle blowing machine is designed based on precise calculation of the die flow channel, with streamlined and no dead corners, and can quickly change colors
Ensure low back pressure and effectively extend the service life of the extrusion system and gearbox
The multi cavity mold head of B10D-560 (4+4) double-layer fully automatic bottle blowing machine has a reasonable distribution of flow channels, and the flow rate can be easily adjusted
Multi layer co extrusion die with heart-shaped channel
The Xingbeier blow molding machine adopts a single-layer die head with double-layer compensating diversion shuttle
All types of blow molding machines can have a visible liquid level line design added to the mold head

Specification of fully automatic bottle blowing machine
Application	B10D-560 bottle blowing machine
clamping force	100kN
Hydraulic drive power	22kW
Template spacing	220-500mm
Move mold stroke	560mm
Dry cycle time	2.8S
Mold size of fully automatic bottle blowing machine	Maximum width: 550mm
	Maximum height: 400mm
	Minimum thickness: 2x110mm
	Maximum module weight: 2x180kG
Drive form of extruder	Communication frequency conversion motor drive
Blow molding machine voltage	380V/50Hz
air pressure	6-10bar
Air Consumption	About 90m3/h
Machine dimensions (length x width x height)	5400x4100x3500mm
Weight of blow molding machine	About 12 tons

The B10D-560 (4+4) double-layer fully automatic bottle blowing machine is equipped with an internationally renowned brand hard toothed gearbox, which runs smoothly, with low noise and high efficiency
The extrusion screw adopts a combination of slotted feeding barrel and barrier screw design, with uniform melt and high plasticizing ability
The material used for Xingbeier blow molding machine is high-quality nitride alloy steel with high surface hardness and long service life
Widely applicable to various raw materials such as PE, PP, PC, PA, PVC, PETG, EVOH, etc

Extruder	Driver power	Maximum plasticizing capacity
		HDPE	PP
E20/20	1.5KW	2kg/h	-
E25/25	3KW	5kg/h	-
E40/25	11KW	30kg/h	24kg/h
E50/25	18.5KW	50kg/h	40kg/h
E60/25	30KW	90kg/h	70kg/h
E70/25	45KW	130kg/h	90kg/h
E80/25	55KW	165kg/h	120kg/h
E90/25	75KW	220kg/h	160kg/h
*The maximum plasticizing capacity is based on 30% uniformly recycled material and 70% new material

Top cutting flash device is used to remove bottleneck, shoulder, and handle flash, with electrical control including flash cooling and blowing
The bottom cutting flying edge device adopts a clamping cutting flying edge structure, driven by a cylinder, and electrically controlled
The fully automatic bottle blowing machine can vertically adjust the height of different products

The hydraulic system of the fully automatic bottle blowing machine is driven by a servo variable speed pump, which has higher energy efficiency and saves 40% energy compared to ordinary oil circuits
The bottle blowing machine adopts a unique design, with a small oil pump load, less self heating of the system, and a more energy-efficient overall hydraulic system
The hydraulic valve uses Bosch Rexroth brand, which is stable, reliable, responsive, and has high precision
The system of Xingbeier blow molding machine runs smoothly, and the entire series of fully automatic blow molding machines use oil temperature controlled automatically by PLC
This series of blow molding machines adopts dual filtration of oil suction and return, which prolongs the service life of hydraulic oil and hydraulic components

The Xingbei bottle blowing machine adopts the Austrian B&G microcomputer system with integrated control. The machine temperature, speed, and time can be directly displayed and freely adjusted through the panel
Equipped with a 10.4 "TFT true color operation screen, the display is accurate and clear, and parameter storage and adjustment are faster
The system of the fully automatic bottle blowing machine is equipped with a 100 point billet wall thickness controller, which provides precise control and uniform product wall thickness, effectively saving raw materials
When the bottle blowing machine malfunctions, it will automatically diagnose and alarm, display directly on the operation screen, remotely diagnose through Ethernet, and correct erroneous parameters

The mold of the blow molding machine is professionally designed, and all blow molded products can achieve fully automatic removal of burrs. Imported high-quality mold steel is carefully selected for fast cooling and long service life

The fully automatic bottle blowing machine adopts separate electrical cabinets for strong and weak electricity to remove interference;
High voltage isolation transformers effectively prevent short circuits caused by human or accidental factors, and protect the PLC of the bottle blowing machine from damage;
The fully automatic bottle blowing machine cabinet is embedded with professional industrial air conditioning, which effectively extends the service life of electrical components in hot, humid or dusty environments, ensuring the stable operation of the bottle blowing machine's control system.