6300l Titanium High Pressure Magnetic Reactor

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

6300l titanium high-pressure magnetic reaction kettle $r $n1, strong corrosion resistance: The titanium reaction kettle has high corrosion resistance and can withstand the reaction of corrosive substances such as strong acids and alkalis. $r$n2、 High temperature and high pressure resistance: Titanium reaction vessels can withstand reactions under high temperature and high pressure environments, and their materials have high resistance to high temperature and high pressure.

Product Details

6300l Titanium High Pressure Magnetic Reactor

1. Design parameters: nominal volume 6000L.

⒉. The design pressure inside the kettle is 6.3MPa (working pressure 5.0MPa), and the design temperature is 200 ℃ (working temperature 185 ℃). Design pressure 1.3MPa (working pressure ≤ 1.2MPa), design temperature 265 ℃ (working temperature ≤ 250 ℃). Design pressure 1.3MPa (working pressure ≤ 1.2MPa), design temperature 265 ℃ (working temperature ≤ 250 ℃).

3.釜内物料:氨水

8. Shaft seal form: magnetic coupling transmission seal.

9. Surface treatment: Cleaning and rust removal treatment of the inner surface of titanium material. Rust removal and painting treatment on the surface of carbon steel.

10. Process pipe mouth configuration: According to the confirmed drawings. The material of the matching flange is S31603.

Belonging to precision equipment, it adopts a conical contact sealing form through a sealing ring, and achieves the purpose of sealing by tightening the main bolt to press them against each other. Special care must be taken for the sealing cone surface to avoid damage caused by various collisions. When installing the cover, first place the reaction kettle body, then carefully install the kettle cover in a fixed position on the kettle body. When tightening the main bolts, they must be tightened diagonally and symmetrically in multiple steps, with even force. The kettle cover is not allowed to tilt to one side to achieve good sealing effect, and the specified tightening torque should not be exceeded to prevent the sealing surface from being squeezed or accelerated wear.

6300l Titanium High Pressure Magnetic Reactor