60A and 100A universal docking device

60A and 100A universal docking deviceCharging module AGV automatic navigation car battery charging system: There are various specifications and models to choose from, including single pole, double pole, three level, four level, 15A, 20A, 35A, 60A, 80A, 100A, 150A, 200A, 250A, etc. It can be used to charge lithium batteries, lead-acid batteries, nickel hydrogen batteries, nickel cadmium batteries, etc. It can also be used in AGV navigation transport vehicle online charging system. The product is widely used in charging systems in the fields of power, railway, communication, logistics automation, national defense, petrochemicals, metallurgy, coal mines, etc.

60A and 100A universal docking device

AGV brush blocks are a new product in today's society and a commonly used supplementary power supply device. They can be seen everywhere in daily life. So, what are the benefits that AGV brush blocks bring to people?
1. No matter where you are, you no longer have to worry about running out of power for the electric appliances you use;
2. AGV brush board brush block is a new type of supplementary power supply equipment developed based on battery charging and discharging technology, which can easily achieve automatic supplementary power supply and automatic discharge functions;
3. The structure design of AGV brush board brush block is reasonable, the technology is complete, and it is particularly convenient to use;
4. Due to its multiple usage locations, it has great convenience.

To achieve good results, it is necessary to ensure a high utilization rate of Automated Guided Vehicles (AGVs). Therefore, AGV driving batteries and battery charging have become a problem. With the development of high-power batteries, it is now possible to allow batteries to be charged quickly within seconds. This technology enables AGVs to complete charging without leaving the production line during production. The battery charging device can be installed anywhere in the entire production process system that allows AGV to stop (such as segmented transportation area, turning area, loading stop area, etc.). The signage should be integrated with the existing layout as much as possible.

The battery charging device consists of a brush plate and a brush block. The brush plate is installed on the ground or can be mounted on the side of the AGV track with a bracket, while the brush block is installed on the vehicle. The factory power supply provides power to the brush board. Once the AGV reaches the charging position and the brush block comes into contact with the brush board, it will charge the AGV. The sliding in/out slope on the brush board can help the brush block smoothly enter or exit. The brush installed on the brush block can sweep away the residue on the brush board, and the working voltage of the battery charging device is 12-80V. When the rated voltage is greater than 25VAC or 60VDC, a protective device must be installed to avoid accidental contact.