- Phone
-
Address
No. 16 Xingye West Road, Mawei High tech Park, Fuzhou, China
Product Categories
Fujian Shangrun Precision Instrument Co., Ltd
301 two-wire HART intelligent temperature transmitter
NegotiableUpdate on 04/13
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The temperature at the industrial site is input to the 301X through a thermistor or thermocouple sensor, and after analog-to-digital conversion, it is converted into the corresponding temperature measurement value by the microprocessor. Then, the microprocessor sends the measured value to the high brightness LCD for real-time display, and converts it proportionally into the corresponding 4-20mA current signal output through digital to analog conversion. At the same time, real-time reading of transmitter information (including measurement values, diagnostic information, etc.) or debugging of the transmitter can be achieved through HART communication.
Product Details
Technical Parameter
input
sensor type
301A/B1: Pt100,Pt1000,Cu50,Cu100
301A/B2: S,R,B,K,N,E,J,T,WRe3-25
301A/B3: Pt100,Pt1000,Cu50,Cu100
S,R,B,K,N,E,J,T,WRe3-25
Accept user specifications
Connection method
301A/B1: A two, three, or four wire heating resistance sensor
301A/B2: One thermocouple sensor and one thermistor sensor (three wire) are used for cold junction compensation, or a fixed cold junction temperature can be set for compensation without a thermistor sensor. The built-in thermistor sensor of the transmitter can also be used for cold junction compensation (the compensation accuracy will affect the final measurement accuracy)
301A/B3: Adopt the connection method of 301A/B1 or 301A/B2 according to the requirements
response time
≤ 250ms with sensor for short circuit and open circuit monitoring
output
Two wire system 4-20mA
HART
Load resistance Ra
Ra ≤ (Us-14.7V)/0.024A, Us is the loop voltage
sensor fault
Short circuit: Accept user specified (3.5～3.75mA)
Open circuit: Accept user specified (21)～23mA)
system failure
Can be set to 3.2mA or 24mA
measurement accuracy
Accuracy (digital measurement accuracy)
See Appendix 1: List of Input Sensor Types and Accuracy
Analog output accuracy
0.025% full scale
Long-term Drift
The first year is less than 0.2% of full scale
Temperature influence
See Appendix 2: Effects of Environmental Temperature
rated operation conditions
ambient temperature
-40～85℃ -20～60 ℃ (explosion-proof type)
condensation
allow
electromagnetic compatibility
GB/T 17626， three-level
Protection level according to EN 60529
IP67
design
casing
Aluminum die-casting parts
weight
1kg (excluding temperature sensor)
size
See Appendix 3: Dimensional Drawing of Two Wire Intelligent Temperature Transmitter
Cable sealing pipe connection thread
M20 × 1.5 Other threads require adapter
Sensor connection
Integrated
split type
Display and Control
Display Size
33×23mm
Display digits
5 people
Unit (switchable)
℃ or ℉
set an option
Three buttons on the panel or a HART handheld device and configuration software compatible with the HART protocol
power supply
15～36V DC
Electrical isolation
Ueff=1 kV, 50 Hz, 1 min between input and output
Certificates and approvals
Explosion proof type
ExdⅡCT6
Intrinsically safe type
ExiaⅡCT6
Two wire transmitters based on current loop power supply can effectively reduce wiring costs, lower power consumption, and improve anti-interference capabilities
• HART communication protocol
4-20mA output
When connected to a thermistor sensor, it has short-circuit and open circuit monitoring functions, and when connected to a thermocouple sensor, it has open circuit monitoring functions.
By using the built-in 3 operation buttons in conjunction with a high brightness LCD display, it is easy to set transmitter parameters locally. In addition, remote parameter configuration of the transmitter can be easily achieved through a HART modem.
The rotatable LCD display enhances the flexibility of transmitter installation and can display real-time information such as the percentage of the current measurement to full scale, the current measurement value and its unit, as well as sensor type and transmitter diagnostic information.
The enclosure has a protection level of IP67 and is suitable for outdoor applications
• Supports all sensors that comply with IEC751 and IEC584
Similar Product Recommend
