- Phone
-
Address
Jiading District Industrial Park, Shanghai
Product Categories
Shanghai Hansi Electromechanical Co., Ltd
3-inch miniature gasoline water pump
NegotiableUpdate on 05/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Before starting the 3-inch micro gasoline water pump, check the installation of all equipment and start it according to the following requirements: inject oil into the gasoline engine and self-priming pump suspension from the fuel port, and check the oil level with a dipstick to ensure it meets the required height.
Product Details
3-inch miniature gasoline water pump
The self-priming pump of a gasoline engine is a small agricultural water pump with excellent performance and advantages such as being powered by gasoline. It is widely used for water collection and farmland irrigation in some remote areas. Users should master the following faults and troubleshooting methods. Self suction pumps create higher efficiency for you. Gasoline engine water pump heating: Reason: Bearing damage; The clearance between rolling bearings or bracket covers is too small; The pump shaft is bent or the two shafts are not concentric; The tape is too tight; Lack of oil or poor oil quality; The balance hole on the impeller is blocked, causing the impeller to lose balance and increase the thrust to one side.
Exclusion method: Replace the bearing; Remove the back cover and install a gasket between the bracket and the bearing seat; Investigate the pump shaft or adjust the concentricity of the two shafts; Adjust the tightness of the tape appropriately; Add clean butter, which occupies the gap inside the bearingAbout 60%; Clear the blockage in the balance hole. The self-priming pump of a gasoline engine cannot suck up water.The requirements before starting the gasoline self-priming pump: When preparing to start the gasoline self-priming pump, check the installation of all equipment and start it according to the following requirements: inject oil into the gasoline engine and self-priming pump suspension from the fuel inlet, and check the oil level with a dipstick to ensure it meets the required height.
| Parameters of 3-inch gasoline engine water pump: | |||
| ProjectprojectModelmodel | HS30X | ||
| Pumpwater pump | Suction prot diameterInlet diameter | mm | 80(3'') |
| discharge prot diameteroutlet diameter | mm | 80(3'') | |
| Max.capa itytraffic | m3h | 50 | |
| Cont.head lifthead | m | 25 | |
| Max.suction headsuction lift | m | 8 | |
| Engineengine | Model:enginetypenumber | HS-170F | |
| Engine typeEngine form | Single cylinder,4-stroke,air-cooled，gasoline engineSingle cylinder, four stroke, air-cooled, gasoline engine | ||
| Bore x Strokeborexitinerary | 70*55 | ||
| Cubic cc.:Discharge consumption | cc | 212 | |
| Max.outpur(3600rpm)power | KW | 4.4（7.5HP） | |
| Alimentation:Oil supply method | NaturalSelf flowing type | ||
| Cooling system:cooling method | Airair cooling | ||
| Starting system:risemoveway | RecoilHand pulled style | ||
| Rpm::turnfast | rpm | 3600 | |
| Oil capacity:Engine oil capacity | L | 0.6 | |
| Fuel tank capacityFuel tank capacity | L | 3.5 | |
| Fuel consumption ratiofuel consumption | g/kW.h | 365 | |
| Lube.brandlubricant model | four-strokeSAE10W-30，15W-40engine oil | ||
| Fuel typeFuel model | 92#automotive unleaded gasoline92#Unleaded gasoline for automobiles | ||
| StandardfeaturesStandard Configuration | Connecter of infall,Connecter of outfallInlet and outlet pipe joints | Yeshave | |
| Filterfilter | Yeshave | ||
| Seal ringsealing ring | Yeshave | ||
| Hooptight hoop | Yeshave | ||
| Sizesize | Packing sizePackaging size（L×W×H） | mm | 520*390*450 |
| Net/Gross weightNet weight/gross weight | kg | 32/34 | |
| 20FT Qty | 178 | ||
| 40FT Qty | 286 | ||
| other | brand | HANSI HANSI | |
| person in charge | Manager Cai | ||
3-inch miniature gasoline water pump
