2T tensile tester from Jiayi Electronics

2T tension meter -3T tension meter -5T tension meter Main technical parameters: 1. Instrument accuracy is 2.0 level. 2. Reference error is ≤± 2% F.S3. The sensitivity of the force measuring instrument should be less than or equal to 0.5% of the full range load. 4. Model, measurement range, external dimensions, and weight.

2T Tensile Gauge -3T Tensile Gauge -5T Tensile Gauge Structure and Working Principle

1. The structure is divided into three parts: connector part, amplification device part, and display part.

2. The working principle is that force is applied to a deformable body through a connecting piece, causing it to undergo elastic deformation. Within the elastic range, the amount of deformation is basically proportional to the applied force, so the magnitude of deformation can reflect the magnitude of the applied force. The deformation amount of the deformable body is amplified by an amplifying device, and the value of the applied force is read out through the pointer on the dial. Note: The specific selection in the assignment should be determined after calculation based on the structure and geological conditions of the mechanical equipment.

2T tension meter -3T tension meter -5T tension meter usage method

1. The pull rings at both ends are connected to the power source through hinges (such as using steel wire ropes or other freely rotatable connectors). During the measurement process, always ensure that the line of action of the external force coincides with the axis of the table.

2. To prevent accidents, a protective steel wire rope should be installed behind the watch.

3. Zero adjustment: Before loading, use a hand to adjust the zero point of the dial to coincide with the hands.

4. Check the card loading status and confirm that the card is securely loaded before loading.

2T tensile tester -3T tensile tester -5T tensile tester Precautions

1. Avoid strong vibrations.

2. The line of external force applied during work must coincide with the axis of the table.

3. The direct force applied by the tension gauge shall not exceed the upper limit value of the gauge.

4. It is very important to use the tension gauge safely. If repairs are needed, they should be returned to our company. Our company is not responsible for any adverse consequences caused by unauthorized repairs.