15-30L 3-layer single-mode head dual station stacking bucket fully automatic hollow blow molding machine

NegotiableUpdate on 06/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Xingbeier blow molding machine is based on precise calculation of the die head flow channel design, which is streamlined and has no dead corners. It can quickly change colors to ensure low back pressure, effectively extending the service life of the extrusion system and gearbox. The distribution of each flow channel in the multi cavity die head is reasonable, and the flow rate can be easily adjusted. The blow molding machine adopts a multi-layer co extrusion die head with heart-shaped flow channels and a single-layer die head with double-layer compensation diversion shuttle. All types of die heads can increase the visual liquid level line design

Product Details

The Xingbeier bottle blowing machine is based on precise calculation of the die head flow channel design, which is streamlined and has no dead corners, and can quickly change colors

Ensure low back pressure and effectively extend the service life of the extrusion system and gearbox

The distribution of each channel in the multi cavity mold head is reasonable, and the flow rate can be easily adjusted

The blow molding machine adopts a multi-layer co extrusion die with heart-shaped flow channels

The blow molding machine adopts a single-layer die head with a double-layer compensating diversion shuttle

All types of molds can be designed with visible liquid level lines

Specification of fully automatic bottle blowing machine
Bottle blowing machine model	B15D-640
clamping force	150kN
Hydraulic drive power	22kW
Template spacing	220-500mm
Move mold stroke	640mm
Dry cycle time	3.0S
Die size	Maximum width: 630mm
	Maximum height: 450mm
	Minimum thickness: 2x110mm
	Maximum module weight: 2x250kG
Drive form of extruder	Communication frequency conversion motor drive
Blow molding machine voltage	380V/50Hz
air pressure	6-10bar
Air Consumption	About 120m3/h
Machine dimensions (length x width x height)	5400x5150x3500mm
Weight of blow molding machine	Approximately 12.6 tons

The Xingbeier bottle blowing machine system is equipped with a hard toothed gearbox from an internationally renowned brand, which runs smoothly, with low noise and high efficiency
The extrusion screw adopts a combination of slotted feeding barrel and barrier screw design, with uniform melt and high plasticizing ability
The metal frame of the blow molding machine is made of high-quality nitride alloy steel with high surface hardness and long service life
Widely applicable to various raw materials such as PE, PP, PC, PA, PVC, PETG, EVOH, etc

Extruder	Driver power	Maximum plasticizing capacity
		HDPE	PP
E20/20	1.5KW	2kg/h	-
E25/25	3KW	5kg/h	-
E40/25	11KW	30kg/h	24kg/h
E50/25	18.5KW	50kg/h	40kg/h
E60/25	30KW	90kg/h	70kg/h
E70/25	45KW	130kg/h	90kg/h
E80/25	55KW	165kg/h	120kg/h
E90/25	75KW	220kg/h	160kg/h
*The maximum plasticizing capacity is based on 30% uniformly recycled material and 70% new material

Top cutting flash device is used to remove bottleneck, shoulder, and handle flash, with electrical control including flash cooling and blowing
The bottom cutting flying edge device adopts a clamping cutting flying edge structure, driven by a cylinder, and electrically controlled
The height of different products can be vertically adjusted

The hydraulic system of the bottle blowing machine is driven by a servo variable speed pump, which has higher energy efficiency and saves 40% energy compared to ordinary oil circuits
Unique design, low oil pump load, low system heat generation, and more energy-efficient overall hydraulic system
The hydraulic valve uses Bosch Rexroth brand, which is stable, reliable, responsive, and has high precision
The system runs smoothly, and the oil temperature is automatically controlled by PLC
Dual filtration of oil suction and return, longer service life of hydraulic oil and hydraulic components

The Xingbei bottle blowing machine adopts the Austrian B&G microcomputer system with integrated control. The machine temperature, speed, and time can be directly displayed and freely adjusted through the panel
Equipped with a 10.4 "TFT true color operation screen, the display is accurate and clear, and parameter storage and adjustment are faster
The blow molding machine system is equipped with a 100 point billet wall thickness controller, which provides precise control and uniform product wall thickness, effectively saving raw materials
Machine malfunction, automatic diagnosis, automatic alarm, direct display on the operation screen, Ethernet remote diagnosis, correction of erroneous parameters

Professional design, all blow molded products can achieve fully automatic removal of burrs. Carefully selected imported high-quality mold steel, fast cooling, and long service life

Separate electrical cabinets for strong and weak electricity to eliminate interference
High voltage isolation transformers effectively prevent short circuits caused by human or accidental factors, protecting PLCs from damage
The electrical cabinet is embedded with professional industrial air conditioning, which effectively extends the service life of electrical components in hot, humid or dusty environments, ensuring stable operation of the control system