10T jack tablet press, small manual hydraulic powder tablet press, 20T press, customized experimental cake press

10T jack tablet press, small manual hydraulic powder tablet press, 20T press, customized experimental cake press

Product Introduction

Manual hydraulic tablet press is a specialized tablet press for western medicine powder, traditional Chinese medicine powder, chemical preparations, etc., which is simple and convenient. The diameter of the extruded disc ranges from 6mm to 100mm. Reasonable structural design, simple and easy to use, good compression molding, compact and not fragile. Practical in industries such as food, medicine, chemical, ceramics, etc. It is an ideal equipment for scientific research in laboratories of enterprises, colleges and universities.

1、 Purpose: The manual hydraulic tablet making machine is a sample making equipment that is easy to operate, maintain, and safe to use. It is suitable for experimental sample making in laboratories of industries such as ceramics, building materials, chemicals, and pharmaceuticals. There are options such as 10 tons, 20 tons, and 30 tons.

2、 Instructions for use:

1. Equipped with various molds and accessories, it has the function of multi-purpose and is safe and reliable.

2. A pressure gauge with corresponding pressure can be installed at the oil cylinder (hydraulic jack); The pressing mold is assembled as shown in Figure 1 and the sample powder is added. It is then placed in a fixed position on the tablet press frame for pressing.

When the compression pressure pointer of the pressure gauge points to the corresponding pressure, the "relief screw" can be loosened to automatically relieve pressure and fall back. After unloading, tighten the "unloading screw", pick up the mold of the compressed powder, then remove and reverse the lower mold as shown in (Figure 2), and place the mold back in the fixed position of the frame for secondary pressing (i.e. demolding pressing)

When the compression pressure pointer of the pressure gauge points to 5-10Mpa, the "relief screw" can be loosened, the mold can be removed, and the sample can be taken out from the lower mold.