Experimental micro vertical extruder with fine wire drawing system

Produced and sold by Shanghai Xinshuo Precision Machinery Co., LtdExperimental micro twin-screw extruderExperimental micro injection molding machines and single screw drawing systems are equipment required for the research of polymer materials and composite materials, including material preparation and molding processes. They can be used for various polymer melt polymerization reactions, polymer blending modification, and composite modification. Desktop devices are designed to occupy a small area and can be easily and safely operated on experimental tables or fume hoods.

details

Experimental micro combinationWire drawing system WJSLX-10

Parameters and characteristics of micro extrusion machine:

1. Specially designed for laboratories, such as matching with experimental micro twin-screw extruders, to achieve one-step completion from melting, mixing to wire drawing, improving experimental efficiency.

2. Less material is needed, 10ml of raw material can be used for wire drawing experiments.

3. Servo motor control, 200W. Head speed 2-10mm/min.

4. The extrusion speed of the die can be controlled by the downward pressure speed or pressure of the top.

5，10ml 储料筒最高温度380度。 模口在 Φ0.3-Φ1.0mm。

Parameters and characteristics of micro combined wire drawing machine:

1. According to the experimental process requirements, various modules can be freely combined to form different drawing processes to meet the material requirements of the experiment.

2. All auxiliary molds can be purchased as needed, and if there are special processes, modules can also be customized.

3. In addition to hot drawing, stress relief, and automatic wire discharge function, the wire drawing process can also perform multiple hot draws.

4. All control parameters are adjustable online. Customizable data output. The extrusion amount and traction speed can be adjusted for easy operation.

5. The cooling module has two forms: vertical and horizontal. It can also be divided into air cooling and water cooling according to material requirements, and the cooling temperature can be adjusted.

6. The maximum linear speed of low-speed wheels is 100 meters per minute, and the maximum linear speed of high-speed wheels is 400 meters per minute, with a maximum traction of 4 times.

7. The device has a power supply of 220V, low energy consumption, and fast heating speed; Small footprint, can be used on a laboratory bench or fume hood. When idle, it can be broken down into smaller parts.

This system can also be used in conjunction with a 10g experimental micro twin-screw extruder