*K-type integrated transmitter

NegotiableUpdate on 05/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

*The K-type integrated transmitter consists of a temperature sensor and a signal converter. The signal converter is installed in the cold junction box of the temperature sensor. The temperature sensor is affected by temperature and produces resistance or potential effects, which are converted to generate a differential voltage signal. This signal is amplified by an amplifier, and then converted into voltage and current to output a 4-20mA current signal or other 0-5V/0-10V signals corresponding to the measurement range.

Product Details

Our company's integrated temperature transmitter combines temperature sensing elements (thermistor or thermocouple) with signal conversion and amplification units to measure the temperature of liquids, vapors, and other gas media or solid surfaces within the range of -200-1600 ℃ in various process flows. It is usually used in conjunction with display instruments, recording instruments, and various control systems. It has the characteristics of simple structure, easy installation, use, and maintenance, and is currently widely used in industries such as petroleum, chemical, metallurgy, power plants, and light industry.

The MCT80Y series integrated temperature transmitter is divided into three categories: ordinary type, explosion-proof type, and digital integrated type. Among them, ordinary and explosion-proof models can choose different built-in temperature transmitter modules to meet different application requirements of users. Temperature transmitters are divided into two series: thermocouples and thermistors, depending on the type of temperature sensor used.

Key Features:

Can be transmitted in a two-wire system. The two wires powered by the signal converter also transmit output signals simultaneously
Output constant current or constant voltage signals, with strong anti-interference ability and good long-distance transmission performance.
The signal converter is encapsulated in epoxy resin as a module, which has the advantages of vibration resistance, corrosion resistance, moisture resistance, etc., and can be used in places with poor conditions.
The millivolt signal of the thermocouple is directly converted into a 4-20mA current output through a signal converter, and the signal is transmitted using ordinary cables, which can save expensive compensation wires.
The temperature transmitter with on-site display not only outputs a current signal of 4-20mA, but also can read the measured temperature at the temperature measurement site, which brings great convenience to operators.
High precision, anti-interference, good long-term stability, maintenance free, and capable of remote transmission (up to 1000 meters).

Technical Indicators:

Range: -200~1800 ℃
Conventional accuracy: ± 0.25%
Supply voltage: 13-30V, DC
Load resistance: 0-850 Ω
Output signal: 4-20mA
Basic error: ± 0.2%, ± 0.5%
Display mode: LCD display
Environmental temperature impact: 0.25%/10 ℃
Cold end compensation error: 0.5%/10 ℃
Explosion proof mark: dIIBT4
Protection level: IP65
Input type: thermistor Pt100、 Two or three wire thermocouples (all known types)
Environmental temperature: -40-85 ℃, with display type ranging from -10-70 ℃
Environmental humidity: 0-95% RH, non condensing
Display options: optional pointer meter or digital LCD display
Material of protective tube: 1Cr18Ni9Ti or ceramic or steel jade tube
The company mainly produces: platinum rhodium thermocouples, wear-resistant thermocouples, anti-corrosion thermocouples, armored thermocouples, K-type thermocouples, right angle thermocouples, handle thermocouples, explosion-proof thermocouples, fast thermocouples, tungsten rhenium thermocouples
*K-type integrated transmitter*K-type integrated transmitter