German HBM Micro Force Sensor

German HBM Micro Force Sensor

U9C miniature load sensor: used for measuring tensile and compressive forces

The compact and cost-effective U9C series force sensor can reliably measure tensile and compressive forces in space. Due to their high fundamental frequency, they are suitable for very fast measurements. Like all strain gauge based transducers, the U9C sensor also allows for reliable and long-term stable measurement of static forces. They ensure robustness and plug measurement solutions through stainless steel welding design and flexible customization concepts. Provide passive load sensors or hard wired online amplifiers to output analog or digital signals.

New content: Added "VAIO" option, U9C is equipped with digital direct coupled amplifier and IO Link interface. Your strengths:

Reliability improvement: U9C's sensor health monitoring will send warnings before temperature or mechanical limits are exceeded.

More information: Statistical information such as mean or sample size.

Lower cost and easy installation: The U9C with VAIO option is a calibrated sensor. When connected to the IO Link controller, you will immediately receive precise readings in Newtons. Low wiring cost.

Standard instrument functions: limit switch, peak detection, digital output, filter.

Fast: Internal sampling rate: 40 kHz, cycle time of IO Link control station is 0.9 milliseconds.

Higher accuracy: Use your calibration to improve the linearity of U9C.

All advantages of U9C:

Compact, vibrant, and sturdy

Small diameter, flat design.

Stainless steel welding design; Tested by EMC.

High rigidity and small mass result in a higher fundamental frequency.

Highly flexible steel cable, suitable for towing chains, resistant to most oils and fats.

In addition to its compact size, the sensor is also sturdy and durable, has undergone EMC testing, and can provide reliable results. It is very suitable for measuring fast processes.

Get ready to use immediately

Various practical cable lengths, suitable for resistance chains, and with fuel resistance performance.

If choosing not to include an inline amplifier: TEDS can provide a plug with a plug upon request, suitable for all high-frequency measurement amplifiers.

Time saving plug and play sensors are highly suitable for industrial environments.

Optional series amplifier

Available industrial standard interfaces: 0... 10 V, 4... 20 mA or IO Link.

Measurement chain replaces sensors: No need to configure measurement amplifiers.

Analog or digital: As a calibration measurement chain, it simplifies the setup process.

Due to the reduced cost of cables and simple or even no installation process, the cost-effectiveness is high. There is no need for space in the cabinet.

The amplifier option is easier to integrate, has lower cost, and higher reliability.

U9C 带 IO-Link

In addition to the known active and passive versions, the U9C can now be optionally equipped with an IO Link interface, achieving fast measurement, cost reduction, higher efficiency, and greater reliability.

U93A Miniature Load Sensor: Used for Measuring Tensile and Compressive Forces in Flange Installation

The U93A, which is compact, sturdy, and extremely rigid, can reliably measure static and highly dynamic tensile and compressive forces. Its small size and excellent dynamic characteristics make it an economical alternative to piezoelectric sensors. Due to the flange screw connections on both sides of U93A, the mechanical connection is simple and secure. This sensor has an IP68 protection rating and is suitable for outdoor use.

Like all HBK force sensors, U93A is easy to configure and can easily adapt to various environments. Its design adopts a supporting aperture, making the sensor extremely sturdy and resistant to lateral forces. Another useful feature for the production environment is that the cable of U93A force sensor is compatible with resistance chains and has oil resistance function.

New content: The newly selected "VAIO" is equipped with a digital direct coupled amplifier and IO Link interface. Your strengths:

Reliability improvement: The sensor health monitoring of U93A will issue a warning before the temperature or mechanical limit is exceeded.

More information: Statistical information such as mean or sample size.

Lower cost and easy installation: The U93A with VAIO option is an adjustable sensor. When connected to the IO Link controller, you will immediately receive precise readings in Newtons. Low wiring cost.

Standard instrument functions: limit switch, peak detection, digital output, filter.

Fast: Internal sampling rate: 40 kHz, cycle time of IO Link control station is 0.9 milliseconds.

Higher accuracy: Use your calibration to improve the linearity of U93A.

All advantages of U93A:

Compact, vibrant, and sturdy

Small diameter, flat design.

The welding design adopts stainless steel and has undergone EMC testing.

High rigidity and small mass result in a higher fundamental frequency.

Highly flexible steel cable, suitable for towing chains, resistant to most oils and fats.

In addition to its compact size, the sensor is also sturdy and durable, has undergone EMC testing, and can provide reliable results. It is very suitable for measuring fast processes.

Get ready to use immediately

Various practical cable lengths, suitable for resistance chains, and with fuel resistance performance.

If choosing not to include an inline amplifier: TED with plug can be provided upon request, suitable for all HBK measurement amplifiers.

Time saving plug and play sensors are highly suitable for industrial environments.

Optional series amplifier

Available industrial standard interfaces: 0... 10 V, 4... 20 mA or IO Link.

Measurement chain replaces sensors: No need to configure measurement amplifiers.

Analog or digital: As a calibration measurement chain, it simplifies the setup process.

Due to the reduced cost of cables and simple or even no installation process, the cost-effectiveness is high. There is no need for space in the cabinet.

The amplifier option is easier to integrate, has lower cost, and higher reliability.

German HBM Micro Force Sensor