German HBM Micro Force Sensor C9C

German HBM Micro Force Sensor C9C

1、 Development Overview of HBM Company in Germany

HBM, a German company, was founded in 1950 and has undergone over half a century of significant development. HBM now has 29 subsidiaries and sales offices worldwide, with representative offices in more than 60 countries. We have research and production centers in Darmstadt, Germany, Marlborough, the United States, Porto, Portugal, and Suzhou, China.

The high quality standards of HBM are evident to all: in 1986, HBM was the first German company to obtain ISO9001 certification. In 1996, HBM obtained the ISO14001 certification issued by the international environmental management agency. HBM is a wholly-owned subsidiary of Spectris plc, a professional technical company specializing in instrumentation and electronic control. For 70 years, HBM testing and measurement market and technology have been trusted by customers, providing products and services for various industry measurement applications, from virtual testing to real physical measurement. Global users rely on HBM Marumi's matching measurement chain to ensure high accuracy of measurement results and optimize the entire product lifecycle: from development to testing, as well as manufacturing and production.

The HBM product range covers sensors, strain gauges, amplifiers, data acquisition systems, and software for structural durability testing and analysis.

2、 Introduction and Main Technical Core of German HBM Force Sensor C9C Type

The C9C product series features compact and cost-effective force sensors that can reliably measure compressive forces in limited spaces. Due to their high fundamental resonance frequency, they are suitable for particularly high-speed measurements. Like all strain gauge force sensors, C9C can also reliably and stably measure low static forces for a long time. The stainless steel and welded structure ensure durability while also possessing toughness.

1. Range: 50N to 50kN

2. Accuracy level: 0.2

3. Features: Compact structure, C9C force sensor with high cost-effectiveness, suitable for reliable tensile and compressive force measurement in small space application environments. Can be used for static or high dynamic measurements. It has a very high fundamental frequency, making it very suitable for high dynamic, fast measurements. Stainless steel material, laser welded seal, very sturdy and durable.

4. Optional accessory: The force sensor can also be provided together with a fixed internal amplifier. In this variant, the product serves as a measurement chain calibration, which records the relationship between the Newton number as the input variable and the volt (V) or milliampere (mA) number as the output variable in the inspection report or calibration certificate.

C9C is equipped with an internal amplifier with fixed connections

There are two active versions of the C9C force sensor: VA1 with voltage output (0-10 V) and VA2 with current output (4-20 mA).

1. Compact, dynamic, and sturdy

(1) Small diameter, flat design

(2) Welding stainless steel structure; Through EMC testing

(3) High stiffness, low weight, therefore possessing a high fundamental resonance frequency

Conclusion: Despite adopting a small design, the sensor still has rust resistance and has passed EMC testing, providing reliable results. Ideal for measuring high-speed processes.

2. Instant availability

(1) Various practical cable lengths; Dielectric resistant cable compatible with drag chains

(2) Variant without online amplifier: Provides TEDS chip, which can provide pre installed plugs for all HBM measurement amplifiers according to requirements

Conclusion: A time-saving plug and play solution that is highly suitable for use in industrial environments.

3. Optional integrated amplifier

There are two active models of C9C force sensors: VA1 with voltage output (0-10 V) and VA2 with current output (4-20 mA).

(1) Replacing sensors with measurement chains: No need to set up measurement amplifiers

(2) Attached test report showing the relationship between force and output signal (in V or mA units)

(3) Easily reset by controlling the output terminal

Conclusion: With the low-cost measurement chain option, debugging is greatly simplified.

German HBM Micro Force Sensor C9C

3、 Introduction to our company, Shanghai Xingtuo Machinery Equipment Co., Ltd

Our company is a legitimate authorized agent and general distributor of ELTRA in Italy. Our company can provide professional ELTRA encoder technical support, and at the same time act as a cost-effective agent to sell most of Italy's ELTRA products, such as standard incremental encoders, absolute encoders, linear encoder systems, and encoder peripheral accessories Rich on-site and practical experience is the core competitiveness of our company. Providing customers with fast delivery time, competitive prices, and excellent technical services is our commitment and pursuit to all customers who use ELTRA products.

The main advantageous brands are:

1. Pneumatic brand

German brand: Festo, FESTO, Baode, GSR, Hilong, Mahler, Samson, SAMSON

Japanese brand: CKD, Hikari, Koganei, SMC, NOK, TACO

South Korea TKC YPC TPC UK Norgren NORGREN Italy UNIVER Italy Kangmaosheng USA Newman Tec USA SUN, Taiwan, China, Taiwan, China

(These pneumatic valves are mainly divided into many small types, such as throttle valves, pressure reducing valves, check valves, oil mist devices, filters, connectors, switches, air pipes, etc.) Wilkerson, USA

ASCO (main valve category, specific online search) Baode BURKERT mainly produces solenoid valves, flow switches, sensors, conductivity, transmitters, etc

2. Hydraulic brand:

NACHI from Japan, Nippon Steel, VICKERS from the United States, PARKER from the United States, HAWE from Germany, TOYOOKI from Japan, Daikin from Japan, ATOS Atos from Italy, REXROTH from Germany,

These are hydraulic products mainly used as reference, including solenoid valves, solenoid directional valves, proportional valves, relief valves, amplifiers, hydraulic pumps, gear pumps, plunger pumps, vane pumps, servo valves, etc

MOOG in the United States only produces servo valves

3. Industrial control products

Germany's Yifumen IFM, Germany's PIL Drunken Pilz, Japan's SUNX Vision, Germany's Turck TURCK, Japan's Keyence, Germany's Pf Plus, Germany's Phoenix, Germany's SICK, Italy's Jeffren GEFRAN, Germany's Siemens, Japan's Omron, Ansen, Germany's H&D, Germany's Baruff, Germany's Marler, Germany's NOVO.

Mainly engaged in sensors, relays, switches, safety barriers, and relays

Hessman in Germany mainly produces switches

4. Instrumentation category: Danish GRAS sound level meter. Swiss E+H, RoseMount under Emerson EMERSON in the United States, Swiss G+F: mainly produces transmitters, flow meters, pressure sensors, etc.