01,21,2026 76 views
The pressure difference acts on the balance pipeLABOM Compact Pressure TransmitterThe positive and negative pressure chamber membranes are equivalent to static pressure balance. Only the height of the liquid column in the balance tube, which is the allowable fluctuation range of the liquid level in the tested equipment, truly acts on the positive and negative pressure chambers of the double flange, making them feel the changes in liquid level. Advanced welding technology ensures long-term stable operation under high temperature and high pressure without leakage of silicone oil. Equipped with a built-in digital temperature transmitter, it undergoes formatted testing before leaving the factory, with extremely low temperature impact. It supports upgrades to fieldbus and field control based technologies. But when there is a certain value, negative transfer can be used to eliminate it. It should be noted that the size of the negative transfer range is only related to the height difference h between the two flanges and the height of the constant liquid level, and is not related to the installation position of the transmitter.
By utilizing digital compensation technology in the conversion principle to compensate for temperature and static pressure, measurement accuracy has been improved and temperature drift has been reduced. It has the characteristics of good long-term stability, high reliability, and strong self diagnostic ability. Becoming the mainstream product in the transmitter market due to its high cost performance ratio. The tested mediumLABOM Compact Pressure TransmitterWhen the joint and sensitive components have a corrosive effect, it is necessary to isolate the high-temperature measured medium from the transmitter. If there are solid suspended solids or high viscosity in the measured medium that can easily block the transmitter joint and pressure chamber, and the measured medium needs to be replaced by flushing instead of mixing. Equipped with a digital LCD display head, it can display three physical quantities: pressure, temperature, and current, as well as 0-100% analog indicators. With button operation, it is easy to set parameters such as active migration, passive migration, and range damping without a standard pressure source. The transmitter can be calibrated for range and data recovery without a manual controller.
