Usage and precautions of digital display glass constant temperature water bath-Chemical Instrument Network

The digital glass constant temperature water bath is mainly used for distillation, drying, concentration, and temperature soaking of chemical or biological products in the laboratory. It can also be used for constant temperature heating and other temperature tests. It is a tool for biology, genetics, viruses, aquaculture, environmental protection, medicine, health, laboratory, analysis room, education and scientific research.

1、 Usage of digital glass constant temperature water bath:

1. When using, it is necessary to add water to the pot first. It can be added according to the required capacity, but not lower than the height of the heating tube.

2. Connect the external power supply, turn on the power switch, the temperature controller lights up, click the function button, and the temperature controller's number starts flashing. Then click △ or ▽ to select the temperature that needs to work. After setting, click the function button to push out the setting state, and then run according to the set temperature. Adjust the speed control knob to the desired speed.

3. After use, turn the speed control knob to the minimum value and turn off the power switch to cut off the power.

IIDigital display glass constant temperature water bathPrecautions for use:

1. The casing should be properly grounded during use to prevent accidents.

2. All kinds of solutions are strictly prohibited from entering the control room to avoid damaging the host.

3. It is strictly prohibited to heat the water tank without water to avoid burning out the heating tube.

4. The agitator must be submerged in water before it can work.

5. When the instrument malfunctions, please have a technician who understands electrical appliances repair it or notify the manufacturer.