The brick rebound tester is suitable for testing the strength of lightweight aggregate concrete and other lightweight materials

Brick rebound testerIt is a method of using a spring to drive a hammer and the restoring force generated by the instantaneous elastic deformation of the brick sample surface when the hammer is struck by the striking rod, causing the hammer to drive the pointer to bounce back and indicate the rebound distance. The rebound value is used as one of the relevant indicators of the compressive strength of the brick to estimate its compressive strength and grade. It is used for non-destructive testing of the strength of sintered ordinary bricks, as well as for testing the strength of lightweight aggregate concrete and other lightweight materials.
The brick rebound tester is used for non-destructive testing of the strength of sintered ordinary bricks, as well as for testing the strength of lightweight aggregate concrete and other lightweight materials.
Instructions for using the brick rebound tester:
During the entire process of operating the brick rebound tester, attention should be paid to the posture of holding the rebound tester. Hold the middle part of the rebound tester with one hand to straighten it; The other hand holds the tail of the instrument and applies pressure to it, while also serving as an auxiliary stabilizer. The operation essentials of the brick rebound tester are to ensure that the axis of the rebound tester is always perpendicular to the concrete testing surface, apply force evenly and slowly, and align it with the testing surface. Slowly advance, read quickly.
Brick rebound testerCompliant with GB/T50315-2000 standard. This instrument is suitable for non-destructive testing of the strength of sintered ordinary bricks, and is also suitable for strength testing of lightweight aggregate concrete and other lightweight materials. Lightweight, flexible, inexpensive, no need for power, easy to handle, very suitable for on-site construction sites and small and medium-sized brick factories.
Characteristics of brick rebound tester:
1. The central guide rod is made of imported materials, with high precision and wear resistance.
2. The shell is made of ultra hard aluminum to avoid damage to the instrument during on-site operations and extend its service life.
3. The pointer slider adopts an external spring coil structure, which not only facilitates the adjustment of friction force, but also ensures the uniform friction force between the pointer shaft and the pointer slider, ensuring the accuracy of the instrument. Compared to peer products, it has good cost performance, high degree, and long service life. Especially suitable for use in small brick factories.