ST106-3T Intelligent Integrated Distillation Instrument

Technical requirements for intelligent integrated distillation apparatus

1ST106-3T Intelligent Integrated Distillation Instrument for Water Quality Testing (Standard Version)Technical Requirements:

1.1 The intelligent integrated distillation apparatus includes the following units: heating control unit, built-in cooling water self circulation unit, distillation endpoint intelligent control unit, anti backflow protection unit, and steam condensation unit.

1.2 Heating control unit:

1.2.1 The heating device adopts bowl shaped far-infrared ceramic vessels suitable for round bottom flasks, with high thermal radiation efficiency, low power consumption, and heating power ≤ 400W;

1.2.2 The heating area is equipped with insulation design to prevent heat loss and ensure uniform and stable heating of the sample;

1.2.3 The heating system is designed with micro boiling and full boiling control modes, which automatically control the heating rate according to different sample boiling points to ensure stable distillation experiments and controllable sample boiling phenomena;

1.3 Built in cooling water self circulating unit

1.3.1 The host cooling system consists of a dual cooling mode of built-in compressor refrigeration and air cooling, and is designed as an integrated system, without the need for external tap water or external cooling water machines. The two cooling modes can automatically switch without manual intervention;

1.3.2 The input power of the compressor should be ≤ 800W, and the cooling power should be ≥ 2000W

1.4 Distillation endpoint intelligent control unit:

1.4.1 The distillation endpoint control unit adopts pressure sensor control technology, which can separately set the volume or weight of the distillate in each well to achieve intelligent distillation operation. The range should be between 1-500ml;

1.4.2 The distillation receiving area is not limited by the shape of the receiving bottle, and the distillate receiving tray should be easy to replace;

1.4.3 After distillation, a clear signal can be given to indicate the end of distillation, such as sound and light alarm prompts.

1.5 Anti reverse suction protection unit:

To ensure that the distillate results are not lost, the system can automatically lock the distillate outlet after distillation to prevent the distillate from being sucked back into the flask and causing experimental failure.

1.6 Steam Condensation Unit:

1.6.1 To improve distillation efficiency, the steam area and cooling area are designed separately, with the steam chamber located on the outside of the cooling water chamber and using double-layer vacuum technology. The upper part of the condenser tube should be equipped with a grinding plug for easy cleaning of the condenser tube.

2ST106-3T Intelligent Integrated Distillation Instrument for Water Quality Testing (Standard Version)working conditions

Power supply: AC 220V, 50Hz

Environmental temperature: 10-35 ℃

Environmental humidity:<60%

3. Product specification requirements:

Host size (mm): 960 × 575 × 398

Time control: 0-200min

Rated power: 3500W

Heating time: 5-8 minutes

Distillation speed: 2-12ml/min

4ST106-3T Intelligent Integrated Distillation Instrument for Water Quality Testing (Standard Version)System configuration:

One main unit, one set of built-in compressor refrigeration system, one set of built-in distillate self-locking device, one set of condenser tube fixing bracket, one set of 500ml double neck glass flask stainless steel placement bracket, six snake shaped condenser tubes, six 500ml double neck glass flasks, six 250ml glass volumetric flasks, and several accessory parts.