The KD-TS8 type furnace front molten iron analyzer adopts * components, with higher measurement accuracy and the use of a more stable new generation furnace front molten iron quality management instrument. The rapid thermal analysis technology before the cast iron furnace takes the solidification temperature curve of the cast iron microstructure formation process as the measured object, and the computer analyzes the solidification temperature curve to obtain the characteristic points of the curve under different compositions. Calculate the carbon equivalent (CE%), carbon content (C%), silicon content (Si%), spheroidization rate (SG%), tensile strength (RM) and other properties of molten iron based on the characteristic points of the curve. The detection time of the thermal analyzer is about 1 minute and 30 seconds, and the detection is completed within the waiting time of the molten iron. Then, the composition of the molten iron is adjusted according to the automatically calculated amount of carburizer, ferrosilicon, and scrap steel, and the appropriate composition of the molten iron is obtained before pouring.
Main performance of KD-TS8 furnace front molten iron analyzer:
1. Instrument specifications:
① Temperature transmitter, * grade motherboard, 19 inch TFT true color widescreen display
② Power supply: AC 220V 50Hz 100W
2. Measurement function:
① Iron grade, carbon equivalent, carbon content, silicon content, undercooling, spheroidization rate, tensile strength, etc
② Setting of target material and weight of molten iron
③ Automatically calculate the amount of carbon additive, ferrosilicon, and scrap steel to be added
④ Automatically draw curves of carbon, silicon, carbon equivalent, primary crystallization temperature, and eutectic temperature changes
⑤ Preservation and Reproduction of Data and Information
3. Setting function: 10 inspection lines, 10 target components, and linkage between inspection lines and target materials can be set
4. Supplement function: Calculate the supplement amount based on the measurement results, comparing the target composition, molten iron weight, and yield rate
5. Recording function: According to the measurement time sequence, it can record 10000 measurement results and reproduce the process
6. Browse function: You can browse the trend distribution chart of the main measurement parameters for data analysis
7. Output function: Measurement records can be transferred to other computers for viewing via USB flash drive
Main technical parameters of KD-TS8 furnace front molten iron analyzer:
Measurement Name Measurement Range Measurement Accuracy
Temp 0 - 1370℃ F.S±0.01%
CE％ 2.20％－5.00％ ±0.05％
C％ 2.00％－4.80％ ±0.05％
Si％ 0.20％－4.50％ ±0.10％
SG％ 62％－95％ ±10.0％
RM HTl00－HT350 zui 小值
