Difference Between High-Speed Centrifuge and Ultracentrifuge
05,22,2026 76 views
KD-TSType 2Fast carbon silicon analyzer in front of the furnace
Fast carbon silicon analyzer in front of the furnacealso calledFurnace front molten iron analyzer、Pre furnace carbon silicon composition analyzer、Carbon silicon equivalent meterCurrently, there are domestic models availableKD-TSType 2When producing cast iron parts, the appropriate chemical composition should be selected based on the casting wall thickness and casting conditions to ensure the required mechanical properties are achieved. When other conditions are the same, carbon equivalent has a decisive impact on the metallographic structure, casting properties, and mechanical properties of cast iron. In the production of ductile iron, only by quickly and accurately measuring the carbon equivalent of the original molten iron can necessary data be provided for the incubation process.
KD-TSType 2Fast carbon silicon analyzer in front of the furnaceMain technical parameters:
1. Measurement function: Perform thermal analysis on white cast iron, gray cast iron, and ductile iron.
2. Measurement parameters: Determine the CEL, C, Si, △ T, △ TM, tensile strength Rm, hardness HB, calculate the quality coefficient R/H, eutectic cluster number MEG, and graphitization factor K of the molten iron.
1. Measurement function: Perform thermal analysis on white cast iron, gray cast iron, and ductile iron.
2. Measurement parameters: Determine the CEL, C, Si, △ T, △ TM, tensile strength Rm, hardness HB, calculate the quality coefficient R/H, eutectic cluster number MEG, and graphitization factor K of the molten iron.
3. The test results are directly read and automatically printed with CEL, C, Si, △ T, △ TM, tensile strength Rm, hardness HB, peak temperature Peak, liquid phase temperature TL, solid phase temperature TS, and eutectic degree SC.
4. Temperature measurement range: 1250 ℃~1350 ℃
5. Accuracy: ≤± 1 ℃ CEL ± 0.047% C ± 0.039% Si ± 0.1%
6. Measurement range: C: 2.1~4.2 Si: 0~20 CEL: 2.5~5.0
5. Accuracy: ≤± 1 ℃ CEL ± 0.047% C ± 0.039% Si ± 0.1%
6. Measurement range: C: 2.1~4.2 Si: 0~20 CEL: 2.5~5.0
7. Display: 4-digit LED display word height 50mm Resolution: 1 ℃
8. Output mode: Current loop TTY4-20mA
8. Output mode: Current loop TTY4-20mA
9. Working parameters: power supply AC 220V, 50Hz; Power 30W, ambient temperature 0-50 ℃
10. Temperature compensation range: 0-15 ℃
11. Matching cup type: K-type
12. Display temperature unit: Fahrenheit or Celsius temperature can be set
13. Maximum measurement time: 240 seconds (usually 1 minute and 45 seconds)
14. Measurement status display: The instrument displays the "Ready" green light, "Measurement" yellow light, and "Completed" red light in a loop
15. Instrument protection standard: IP65 standard protection
16. EMC standard: Implement EN50081-2 and EN50082-2 anti-interference standards
10. Temperature compensation range: 0-15 ℃
11. Matching cup type: K-type
12. Display temperature unit: Fahrenheit or Celsius temperature can be set
13. Maximum measurement time: 240 seconds (usually 1 minute and 45 seconds)
14. Measurement status display: The instrument displays the "Ready" green light, "Measurement" yellow light, and "Completed" red light in a loop
15. Instrument protection standard: IP65 standard protection
16. EMC standard: Implement EN50081-2 and EN50082-2 anti-interference standards
17. Operation method: Use the 9 buttons to select the desired parameters, where "Auto" displays CEL, C, and SI in a loop. Adjust the Si content by rotating the potentiometer, and adjust the C content by using the internal potentiometer.
