08,12,2026 1 views
From August 12th to 14th, the 34th China International Measurement and Control Conference was heldinstrumentThe Instrument Exhibition was held at the Binhu International Convention and Exhibition Center in Hefei. The exhibition has been successfully held for 33 sessions, with thousands of companies from 40 countries and regions and a total of over 600000 attendees. The conference always focuses on the integration of academia and industry, actively promoting the green and intelligent transformation and upgrading of the industry, and assisting in the high-quality development of the industry.
As one of the oldest and most influential exhibitions in the domestic instrumentation industry, this exhibition has attracted more than multiple domestic and foreign companies to participate. Huazhong Instrument Manufacturing (Shanghai) Co., Ltd. (hereinafter referred to as Huazhong Manufacturing) showcased its innovative products and solutions at this exhibition. With its independently developed core technology and product matrix, it has become one of the highly anticipated exhibitors on site.
Huazhong Manufacturing is a high-tech enterprise in China that focuses on high-end precision fluid measurement and control and intelligent system integration. It is also a specialized, refined, innovative and small and medium-sized enterprise in Shanghai. The company has been deeply engaged in the field of precision measurement and control of small flow for 16 years, focusing on the core track of industrial precision measurement and intelligent control. It integrates the three core intelligent system measurement and control fields of flow, pressure, and temperature, and can provide an integrated complete solution from precise measurement to remote intelligent control for high-end scenarios in various industries.
Based on 16 years of deep industry cultivation and technological accumulation, the company takes high-precision small flow measurement and control as its core technology label, and constructs three core barriers: 0.01mm ultra precision machining process, special anti-corrosion and weather resistant material system, and high stability intelligent sensing technology. To address industry measurement and control challenges such as small flow rates, complex media, and extreme working conditions of high, low, and high temperatures and pressures, multiple rounds of technological iterations and process upgrades have been completed to form a differentiated and high barrier core manufacturing capability. At the exhibition, Hualu Manufacturing highlighted its independently developed star products - HGF100 series gear flowmeter, HK-SF micro electromagnetic flowmeter, HK temperature flow integrated turbine flowmeter and other products.
HGF100 series gear flowmeter
As a volumetric flowmeter with high measurement accuracy, gear flowmeter utilizes the large pressure difference between the inlet and outlet of the measuring chamber to drive a pair of gears located inside the measuring chamber to mesh and calculate the instantaneous flow rate and cumulative amount of fluid per unit time in the pipeline.
This product has an excellent wide range ratio (1:100), combined with a resolution of up to 10-16P/rpm, which can accurately capture small flow rate changes. Its medium measurement temperature range covers -196 ℃ to 180 ℃, suitable for low corrosive liquids such as water and oil without impurities. It is also capable of measuring high viscosity media such as syrup, asphalt, and honey (up to about 200000 MPa. s). In terms of performance, the product provides high accuracy of ± 0.5% readings and excellent repeatability of 0.1%, ensuring stable and reliable data. In addition, it also supports multiple signal output methods such as pulse, analog, RS-485, and Hart, which can flexibly adapt to various industrial automation control systems and meet diverse application needs under complex working conditions.
HK-SF miniature electromagnetic flowmeter
The HFSF10 miniature electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. When a conductive liquid flows through the sensor, the charged particles in the liquid move in the magnetic field. The sensor sends the detected voltage signal to the processor of the flowmeter, which calculates the flow rate based on the magnitude of the voltage and the characteristics of the liquid, such as conductivity.
The HK-SF miniature electromagnetic flowmeter adopts a non-invasive measurement principle, which does not require direct contact with the fluid and does not require straight pipe sections at the front and rear. It is easy to install and does not affect the fluid flow state. The lower limit of flow rate measurement can be as low as 5 millimeters per second, with a wide range ratio, which can meet the precise measurement requirements at extremely low flow rates. The product has a high measurement accuracy of ± 0.5% reading value and supports multiple signal output modes such as pulse, analog, and RS-485, making it easy for system integration. In terms of structural design, the electrode is integrated with PEEK lining material, endowing the product with excellent corrosion resistance and suitable for flow measurement of corrosive fluids. In addition, the instrument has built-in air traffic control alarm and excitation alarm functions, which can monitor the working condition status in real time and provide reliable guarantee for process control.
HK temperature flow integrated turbine flowmeter
The temperature flow integrated turbine flowmeter is an intelligent flow measurement instrument that integrates a turbine flowmeter and a temperature sensor, and has precise measurement functions for both flow and temperature. It takes the turbine structure as its core, and when the measured fluid flows through the sensor, it drives the turbine blades to rotate. By detecting the change in turbine speed, the flow data is converted. At the same time, with the help of the built-in high-precision temperature sensor, the fluid temperature is monitored in real time, and the dual measurement results of flow rate and temperature can be synchronously output.
This product integrates temperature and flow dual parameter synchronous measurement function, suitable for a wide range of media, and can flexibly adapt to various industrial fluid working conditions. Its range ratio covers 10:1 to 20:1, which can meet the measurement needs of different flow ranges. At the same time, it has a built-in temperature compensation algorithm to effectively improve data accuracy, ensuring flow accuracy of ± 1% and temperature accuracy of ± 0.2 ℃. The product supports pulse and 4-20mA signal output, making it easy to interface with various control systems; Compact in size and structure, especially suitable for equipment integration, providing stable and reliable measurement performance without occupying too much installation space.
Huazhong Manufacturing has delivered a solid technical answer sheet at the 34th China International Measurement Exhibition with sixteen years of focus and accumulation. In the future, Hualu Manufacturing will continue to deeply cultivate the field of precision measurement and control of small flow, with independent innovation as the engine and customer demand as the guide, constantly promoting product iteration and system upgrades, and contributing more accurate and reliable "Hualu solutions" to the intelligent and green transformation of the process industry.
