How to improve the service life of anemometers

1) Do not use anemometers in flammable gas environments.

2) Do not place the anemometer probe in flammable gases.

3) Do not disassemble or modify the anemometer.

4) Each model of anemometer comes with an instruction manual, please use the anemometer accurately according to the requirements of the manual.

5) If the anemometer emits a strong odor, sound, or smoke during use, or if liquid flows into the interior of the anemometer, please immediately shut down and remove the battery.

6) Do not expose the probe and anemometer body in the rain.

7) Do not touch the sensor area inside the probe.

8) When the anemometer is in long-term bad luck, please remove the internal battery. Otherwise, the battery may leak and cause damage to the anemometer.

9) Do not place the anemometer in areas with high temperature, high humidity, high dust, and direct sunlight. Otherwise, it will lead to damage to internal components or deterioration of anemometer performance.

10) Do not use volatile liquids to wipe the anemometer. Otherwise, it may cause deformation and discoloration of the anemometer housing. When there are stains on the appearance of the anemometer, a soft fabric and neutral detergent can be used to wipe it off.

11) Do not drop or heavily press the anemometer.

12) Do not touch the sensor part of the probe in an environment where the anemometer is charged.

13) After using the anemometer, please put it in the installation box immediately and do not leave it anywhere.