Discuss the placement, cleaning, and transportation of CBS liquid nitrogen tanks

chatCBS liquid nitrogen tankPlacement, cleaning, and transportation

1. Placement

CBS liquid nitrogen tanks should be stored in a well ventilated and cool place, and should not be exposed to direct sunlight. Due to its precision manufacturing and inherent characteristics, liquid nitrogen tanks should not be tilted, placed horizontally, inverted, stacked, or impacted during use or storage. They should be handled with care and placed upright.

2. Cleaning

　　CBS liquid nitrogen tankWhen not in use, rinse with clean water, blow dry with a blower, and leave at room temperature for later use. Because after the liquid nitrogen inside the tank evaporates, the missing substance quickly melts and becomes a liquid substance that adheres to the inner liner, causing corrosion to the aluminum alloy inner liner. If a cavity is formed, the liquid nitrogen tank will be scrapped. Therefore, it is necessary to scrub the tank after the liquid nitrogen in the tank is exhausted.

The specific brushing method is as follows:

·Remove the lifting tube from the liquid nitrogen tank, remove the liquid nitrogen, and let it sit for 2-3 days until the temperature inside the tank rises to around 0 ℃;

·Pour in warm water at around 30 ℃ and scrub with a cloth;

·If individual melted substances are found sticking to the bottom of the inner container, be sure to carefully wash them clean;

·Rinse several times with clean water;

·Invert the liquid nitrogen tank and air dry naturally, or use a blower to air dry.

3. Transportation

　　CBS liquid nitrogen tankIt must be securely fastened during transportation. Tanks should be separated by fillers to prevent bumps and impacts, and to prevent tipping. When loading and unloading the vehicle, it is necessary to strictly prevent the liquid nitrogen tank from colliding, and it is also not allowed to drag it on the ground at will, so as not to reduce the service life of the liquid nitrogen tank.