Shanghai Materials Research Institute Procurement Department Standard Low magnification Electrolytic Corrosion Tester-Zhejiang Kebiao Technology Co., Ltd

About Us

Certificates

Zhejiang Kebiao Technology Co., Ltd

E-mail
sunuaa@163.com
Phone
15958368264
Address
Building 5, No. 1237 Jiachuang Road, Xiuzhou District, Jiaxing City, Zhejiang Province

Shanghai Materials Research Institute Procurement Department Standard Low magnification Electrolytic Corrosion Tester

Date: 2022-04-01Read: 2

Shanghai Materials Research Institute Procurement Department Standard Low magnification Electrolytic Corrosion Tester

The Shanghai Institute of Materials Research (SRIM) originated from the "Material Performance Testing Laboratory" established in 1946 and has grown rapidly with the rise and development of industry in New China. In the 1990s, it had become the core research and development institution for engineering materials technology in the mechanical industry. At the end of the last century, driven by deepening the reform of the scientific and technological system, it developed into a high-tech enterprise for new materials in Shanghai; Shanghai Engineering Materials Technology Backbone R&D Institution and Fair Third Party Material Testing Institution.

The institute is a supporting unit of Shanghai Key Laboratory of Engineering Materials Application Evaluation, Shanghai Failure Analysis and Safety Assessment Center, Shanghai Energy Dissipation and Seismic Reduction Engineering Technology Research Center, etc; It is a affiliated unit of the Secretariat of the Physical and Chemical Inspection Branch, Non destructive Testing Branch, and Materials Branch of the Chinese Society of Mechanical Engineering, the Mold Materials Committee of the China Mold Association, and the Standardization Technical Committee for Non destructive Testing; And edit and publish various professional technical publications such as "Mechanical Engineering Materials", "Physical and Chemical Inspection", "Non destructive Testing", "Corrosion and Protection", "Energy Technology", etc.

KME-IIIIntroduction to low magnification tissue electrolytic acid etching device

one、Equipment Function Introduction

KME-IIILow magnification tissue electrolytic acid etching deviceAccording to《GB226-2015Acid corrosion inspection method for low magnification structure and defects of steelPrepare low magnification tissue samples using electrolytic acid etching method.

lThe concentration of hydrochloric acid used in the electrolytic acid etching method is onlyHalf of the hot acid etching method, andNo need for heating, low temperature, less volatilization of hydrochloric acid, significantly improving the working environment.

lThis device does not require preheating and can corrode upon turning on the power, saving time; And multiple rows of samples can be placed in parallel at the same time, resulting in high efficiency and good repeatability .

lThe power control part and the electrolytic corrosion tank can be placed separately for a long distance,To reduce damage to operators and corrosion of power control components.

lThis device is suitable for users who have a large number of samples every day. If the number of samples is small or small, it is recommended to use a low magnification tissue hot acid etching device.

two、Technical Specifications

Power supply and control：

Input voltage: 380V，50HZ；

Output voltage:0-36V；

Output current:0~400A(Effective value);

Rated input * * * power: approximately16KW；

Time control:0-99Minutes, displayed simultaneously

Pre set time and countdown working time;

Electrolytic acid etching tank：

During acid corrosion work, the acid solution is quickly added from the lower storage tank to the upper corrosion tank through an acid resistant pump;

After the acid etching work is completed, the liquid automatically flows back to the storage tank;

When placing or removing samples, there is no liquid in the acid tank, making the operation safe and convenient;

Dimensions: LengthxwidexHigh:1250x780x1110 mm；

According to the size and quantity of the samples inspected by the user, the size of the acid tank can be customized;

Acid resistant pump flow rate:75L/Thickness of corrosion groove wall:20mm；

Sample related parameters:

Effective size of corrosion tank: lengthXwideXdepth860 *460*420 mm；

By customizing the size of the acid tank, it can meet the user's sample size requirements；

Equipped with sample carrying frame, size800*400*380mm；

three、Packing List

1. control box a

2. output cable two pieces

3. Acid resistant tank and covera set

4. Sample holder 1only

5. Electrode plate (stainless steel) 1Set (total)2Block)

6. Wiring bolts, nuts two sets

7. Operation Manual a copy

8. Certificate of conformity and maintenance records a copy