Technical Explanation of Eurofins 6180A Paperless Recorder

According to existing information, the equipment is represented by Zhejiang Jiangheng Instrument Equipment Co., Ltd. Due to the lack of specific technical parameters in the current attachment, the following is an explanation of the dimensions you are concerned about based on the general design specifications and industrial application requirements for paperless recorders:

1、 Hole size

Panel opening standard

The common specifications are 138mm × 138mm (vertical screen) or 192mm × 96mm (horizontal screen), which need to be confirmed according to the equipment model

The installation depth is usually 150-200mm, and heat dissipation space needs to be reserved

Cabinet adaptation suggestions

Suggest using standard DIN rail (35mm) for installation

The edge of the opening needs to be treated with anti scratch measures to avoid damaging the equipment casing

2、 Communication method

Wired communication interface

Standard RS-485/RS-232 serial port, supporting Modbus RTU protocol

Optional Ethernet port (TCP/IP protocol) for LAN data upload

Wireless scalability

Some models support 4G modules (optional) to achieve remote cloud platform access

Can interact with local SCADA system through Wi Fi module

3、 Connection method

Signal input connection

Supports direct connection of multiple types of sensors such as thermocouples (K/J/T type), RTDs (PT100), 0-10V voltage, 4-20mA current, etc

Optical isolation is used between channels, with anti-interference ability ≥ 1500V AC

Power supply and grounding

Power supply range: 85-264V AC or 24V DC (wide voltage design)

The grounding resistance requirement is ≤ 4 Ω, and an independent grounding wire is required

Data output interface

Alarm output: Relay contact (capacity 2A/250V AC)

Printing interface: Parallel port or USB-A (supports external thermal printers)

Precautions

Due to the lack of technical manuals for specific models, it is recommended to obtain accurate parameters through the following methods:

Contact the supplier (Zhejiang Jiangheng Instrument Equipment Co., Ltd.) to request the "6180A Installation Manual"

Provide the device body nameplate model to confirm the details of the manufacturing configuration

If you need to further understand the wiring diagram or communication protocol configuration details, you can supplement specific application scenarios (such as temperature recording in pharmaceutical workshops, boiler pressure monitoring, etc.), and I will provide targeted suggestions.