Installation method and operation precautions of stainless steel manual gate valve

About Us

Zhejiang Haoli Valve Co., Ltd

E-mail
283075@qq.com
Phone
18060998993
Address
1st Floor, No. 5 South Branch of Binhai 10th Road, Wenzhou Bay New Area, Wenzhou City, Zhejiang Province

Date: 2025-07-13Read: 16

Stainless steel manual gate valve is a common industrial valve widely used in fluid transportation systems, especially in situations where precise flow control is required. Its main function is to control the fluid flow in the pipeline, which can be opened, closed or regulated to ensure the safe and effective operation of the pipeline system. As a mechanical valve, it is widely used in industries such as petroleum, chemical, power, metallurgy, and water treatment due to its durability, corrosion resistance, and other characteristics.

The working principle is based on the lifting and lowering of the gate to achieve fluid switch control. There is a flat gate plate inside the valve body, which can move up and down through the sealing fit between the valve stem and the valve seat manually operated. The gate is in close contact with the valve seat when closed, preventing fluid flow; When opened, a gap is formed between the gate and the valve seat, allowing fluid to pass through.

　　Stainless steel manual gate valveThe main characteristics are:

1. Strong corrosion resistance: Stainless steel material has excellent corrosion resistance, and can operate stably for a long time even in environments with strong acid and alkali corrosion. This makes manual gate valves particularly suitable for industries such as chemical, pharmaceutical, and food processing.

2. High temperature tolerance: It can work normally at high operating temperatures and is suitable for controlling high-temperature and ultra-high temperature fluid media.

3. Simple structure and easy maintenance: The structure is simple and easy to operate and maintain. Due to the lack of a complex driving system, maintenance costs are relatively low.

4. Good sealing performance: The sealing design between the gate and valve seat enables manual gate valves to effectively prevent fluid leakage and ensure the safety of the pipeline system.

5. Flexible operation: Manual operation is achieved through a handwheel or lever, which provides high flexibility and allows for precise control of the valve's opening and closing status. It is particularly suitable for situations where frequent opening or closing is required.

6. Good wear resistance: Stainless steel material has good wear resistance, especially during high-frequency opening and closing processes, which can effectively extend its service life.

Installation and use of stainless steel manual gate valve:

1. Installation location: It should be installed in a location that is easy to operate and maintain, ensuring that operators can easily perform manual control. Especially in high-temperature or high-pressure systems, it is necessary to ensure sufficient space around the valve for inspection and maintenance.

2. Installation method: It can be installed on horizontal or vertical pipelines, but for ease of operation, it is usually recommended to install it on horizontal pipelines.

3. Precautions for operation: When operating, the handwheel should be slowly rotated to avoid sudden opening or closing that may cause pressure fluctuations in the pipeline. During the operation, the sealing performance of the valve should be regularly checked to prevent leakage.

4. Maintenance: Regularly inspect the sealing surface, valve stem, and manual drive device of the manual gate valve to ensure its good sealing and operational performance. Especially in high temperature or corrosive environments, regular anti-corrosion treatment and lubrication work should be carried out.

Last Article: Selection Guide for Stainless Steel Gate Valves

Next Article: Basic principles and application areas of soft sealed ball valves