What technical features does the XXG2505L X-ray flaw detector (ceramic orientation) meet? Equipment Introduction (Ceramic Orientation)

Focal length: 600mm

Exposure time: 5 minutes

Blackness: 1.5

Input voltage: 220V ± 10%, 50-60Hz

Output voltage: 150KV-250KV

Power: 2.5Kw

Focus size: 2.0 * 2.0mm

Radiation angle: 40 °+5 °

High penetration power: A3 steel 42mm

Weight: 23Kg

Size: 270 * 270 * 612 (mm)

Working mode: Intermittent work, without cutting off the power supply.

Cooling method: forced air cooling.

Insulation gas: SF6 gas insulation.

Connecting cable: standard 20 meters, can be extended. The cable is 10 meters long.

controller

Slow rise and slow fall: At the beginning of exposure, the primary voltage slowly rises, and after exposure ends, the primary voltage slowly falls.

Delayed exposure: Optional delay time (0.1-9.9 minutes).

Microcomputer control: digital circuit, modular architecture, status prompt.

Weight: 11Kg

Size: 340 * 300 * 140 (mm)

Working voltage: 220V ± 20%, 50Hz

What technical features does the XXG2505L X-ray flaw detector (ceramic orientation) meet? configuration

1. The controller is a handheld touch screen;

2. The plugs for the kilovolt board and milliampere board in the controller are of high quality;

3. The transmission signal line uses imported resistance elements, all of which are components;

4. The controller has two fuses to ensure the safe use and lifespan of the radiation generator;

5. Select domestic cables for connecting cables;

6. Imitation of Japanese Neo Confucianism fastening plugs;

7. The head radiator is made of thermally stretched corrugated aluminum;

8. The fan is a high-speed fan with excellent heat dissipation effect;

9. The high-voltage wire package adopts imported wire and imported nano film;

10. After eight hours of natural cooling under hot vacuum, add insulating gas to the equipment;

11. Before leaving the factory, the equipment shall undergo at least thirty aging tests;

The entire production process strictly follows the quality system standards.