1. Can accommodateSix reaction bottles react simultaneously, with temperature control and stirring functions. The entire system can explore reaction routes and optimize parallel synthesis reactions.

2. Number of reaction bottles for simultaneous reaction: six

3. Acceptable volume of reaction bottle:5-3000ml

4. Reactor temperature range:-30 to 200 ℃

5. Temperature control stability:0.02℃

6VFD high-definition large screen display temperature, display resolution: 0.01 ℃

7. Mixing speed:100-2000rpm

8. Zui high stirring viscosity:2000cps

9. Compact design, the entire reaction system can be placed in a fume hood or safety cabinet

10. Standard waterproof immersion magnetic drive mixer, requiring stainless steel material and protection level ofIP68， Can be directly immersed in water or oil and can operate normally for a long time

11. Adopting electromagnetic induction stirring, each reaction bottle is equipped with an independent electromagnetic coil to control stirring

12. Program temperature control can be set, with six options available for each oneTemperature control program for 60 temperature points

13PID temperature control technology, over temperature power cut-off and dry burn protection function, over temperature power cut-off and dry burn protection function

14The bath liquid in the bath can circulate, with a circulating pump flow rate22-26L/min， Combination of suction pump and pressure pump, pump pressure 0.7bar, pump suction 0.4bar

15. Can be obtained fromDirectly activate the cooling function at 200 ℃ for cooling

16. Compact design, can be installed in fume hoods or safety cabinets

17. Standard response temperature control software, which can detect the response temperature change curve and set programs through a computer

18. Equipped with a reaction bottle holder, which can fix the reaction bottle and possible condenser tubes, etc. 19. Configuration:One compact heating and cooling cycle unit; One waterproof immersion magnetic drive mixer; One magnetic stirrer controller; One reaction bath; Three 25ml reaction bottles; 3 50ml reaction bottles; Three 100ml reaction bottles; 1 set of reaction support bracket; 6 magnetic stirrers; A set of CR circulation tubes (-20 to 120 ℃); One external PT100 temperature sensor; One set of temperature control software; One RS232 data cable